Shop
- BRAND-REX, Cat5E, Cat6 Accessories, Cat6 Patch Panels, Cat6a Accessories, Cat6a Patch Panels, Leviton, Structured Networking
MMCPNLX24SIJ2M-B LEVITON 1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
131.00 AEDAdd to cartLEVITON MMCPNLX24SIJ2M-B
1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
DESCRIPTION
The 1RU 24-Port Modular Staggered Snap-in-Jack panel offers additional crosstalk performance in unshielded 10GPlus systems. Staggered design provides exceptional crosstalk performance in unshielded Category 6A systems. The 10GPlus system is classified as a Category 6A and Class EA product set that is fully backwards compatible to Cat 6 (Class E) and Cat 5e (Class D) products.
• Port orientation protects pin arrays from dust and enhances contact reliability
• Compatible with all standard 19 inch racks and cabinets - BRAND-REX, Cat5E, Cat6 Accessories, Cat6 Modules & Outlets, Cat6a Accessories, Faceplates & Back Boxes, Leviton, Structured Networking
MMCWDOUNI071 LEVITON 86 x 86mm Single Gang Faceplate with Shuttered module 2 x RJ45 White
9.00 AEDAdd to cartLEVITON MMCWDOUNI071
86 x 86mm Single Gang Faceplate with Shuttered module 2 x RJ45 White
DESCRIPTION
Leviton’s UK style outlets and accessories have been designed to be used in conjunction with our extensive snap-in-jack range, from Cat 5 through to Cat 8. The range is manufactured using robust and durable ABS plastic.
• Supplied in both UNI and Integrated ranges
• Manufactured in ABS plastic
• Single and double gang options
• Faceplates are supplied with M3.5 fixing screws
• Faceplate mounting holes countersunk with pitch of 60.3mm for single and 120.6mm for double gang
• Alternative colors available on request N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
25.00 AEDAdd to cartN116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
25.80 AEDAdd to cartN116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
43.00 AEDAdd to cartN116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
100.00 AEDAdd to cartN116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.N11A.U1F010OK Nexans LANmark-6A Ultim UniBoot Patch Cords, 1 mtrs
26.00 AEDAdd to cartN11A.U1F010OK Nexans
DESCRIPTION
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.N11A.U1F020OK Nexans LANmark-6A Ultim Patch Cord, 2 Meters
31.00 AEDAdd to cartN11A.U1F020OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application. LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points. They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels. Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
35.00 AEDAdd to cartN11A.U1F030OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
20.30 AEDAdd to cartN121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
N121.4MLY Nexans Pigtail LC/UPC Singlemode 9/125 1m Yellow
20.00 AEDAdd to cartPigtail characteristics
· Fibre assembly to terminate cable with fusion splicing
· Suitable for use in patch panels using splice cassettes.
· The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
The LANmarkOF
OM3 pigtails have LANmarkOF
OM3 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.2b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM4 pigtails have LANmarkOF
OM4 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.3b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM5 pigtails have LANmarkOF
OM5 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.4b. The pigtail jacket is Lime Green.
·
The LANmarkOF
SM pigtails have LANmarkOF
SM GIGAliteFLEX fibre
inside. These fibres are bend insensitive and compliant to ITUT
G.657.A1 and to
IEC 60793250,
fibre model B6.a1. The pigtail jacket of the singlemode pigtails is
yellow.N121.5MLA Nexans LANmark-OF Pigtail LC OM3 Maxistrip LSZH 50/125 1m Aqua
19.70 AEDAdd to cartN121.5MLA Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF OM3 pigtails have LANmarkOF OM3 GIGAliteFLEX fibre inside. This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793210, fibre model A1a.2b. The pigtail jacket is Aqua.Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
21.00 AEDAdd to cartN123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroBundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
N205.617 Nexans Duplex LC Snap-In Adaptor Multimode Aqua
23.00 AEDAdd to cart11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)N205.617 Nexans LANmark-OF Snap-In Adaptor
21.50 AEDAdd to cartN205.617 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
N205.624 Nexans Adapter DSC-DSC Single mode
30.00 AEDAdd to cartNexans N205.624
LANmark-OF Snap-in Adapter DSC-DSC Single mode
Description
LANmark-OF snap-in adapters have been designed for snapping into the
modular OF patch panels and ZD boxes. They are available in single SC,
dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector
types offer double density, as two fiber connections are offered on the SCtype
footprint. Installation time is saved as the snap-in concept replaces
the time-consuming screwing attachment of coupling devices.
Materials
· Adapter Housing: PBT, 15% Glass
· Sleeve Holder: PBT, 20% Glass
· Dust Cap: PP
· Spring:SUS 304 CSP 3/4 H
· PB Sleeve: PB – inner diameter 2,48mm – length 11.4mm
· Zirconia Sleeve: ZA Ceramic – inner diam.: 2.48mm -length11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)- Fiber Optic Duplex Connectors, Fiber Optic Simplex Connectors, Fiber optical Patch Panel, Fibre Networking, NEXANS
N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
30.10 AEDAdd to cartN205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
N205.627 Nexans LANmark_OF_Duplex_LC_Snap_In_Adaptor_Singlemode
37.20 AEDAdd to cartN205.627 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
N420.66A Nexans Connector Category 6A
23.00 AEDAdd to cartN420.66A Nexans
Connector Category 6A
DESCRIPTION
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the
latest Category 6A specifications defined in the International and American cabling
standards and are designed to meet or exceed the stringent quality and performance
criteria needed to support all applications up to 500 MHz, including 10 Gigabit
Ethernet.
A fully closed metal rear cover providing 360 degrees shielding offers excellent
coupling attenuation and ensures immunity from Alien Crosstalk and other external
interferences.
Channels built with LANmark-6A cables and jacks do not need on site testing for Alien
Crosstalk, as this parameter is met by design. This significantly reduces the installation
cost for 10G network cabling.
· 10 BASE-T Ethernet
· 100 BASE-T Fast Ethernet
· 1000 BASE-T Gigabit Ethernet
· 10G BASE-T Gigabit Ethernet IEEE 802.3
· 155 Mbit ATM
· 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC
60512-99-002/ed.1 draft (test 99b)N420.66A Nexans LANmark-6A Snap-In Connector
23.00 AEDAdd to cartN420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A specifications defined in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This significantly reduces the installation
cost for 10G network cabling.• 10 BASE-T Ethernet
• 100 BASE-T Fast Ethernet
• 1000 BASE-T Gigabit Ethernet
• 10G BASE-T Gigabit Ethernet IEEE 802.3
• 155 Mbit ATM
• 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).N424.532 Nexans UK Style Backbox Single Gang White
7.00 AEDAdd to cartN424.532 Nexans
DESCRIPTION
LANmark Snap-In Modules in standard UK styles
• 25 x 50 mm angled and flat shuttered modules for 1 LANmark Snap-In connector
• LJ6C angled and flat shuttered modules for 1 LANmark Snap-In connector
• 50 x 50 mm angled shuttered modules for 2 LANmark Snap-In connectors Single and Double gang Frames
Various designs of frames to fit the 25 x 50 mm or 50 x 50 mm LANmark Snap-In Modules. Blank Modules To cover unused space in single or double gang frames e.g. when only 1 or 3 ports are required. Single and Double gang Back Boxes Suitable with the single and double gang frames.N424.532 Nexans UK Style Backbox Single Gang White
9.00 AEDAdd to cartNexans N424.532
UK Style Backbox Single Gang White
DESCRIPTION
LANmark Snap-In Modules in standard UK styles
· 25 x 50 mm angled and flat shuttered modules for 1 LANmark Snap-In connector
· LJ6C angled and flat shuttered modules for 1 LANmark Snap-In connector
· 50 x 50 mm angled shuttered modules for 2 LANmark Snap-In connectorsN42i.101 Nexans DIN-Rail Outlets and Boxes
469.00 AEDAdd to cartNEXANS
· For DIN-Rail mount (35mm)
· Data connection for the industry
· For up to 6 copper of fibre optic Snap-In connectors (not included)
· Splice trays as accessories
· For technical enclosures, Wireless Access Points, Industrial cabinets
· Snap-In connectors not included· Robust metal body, powder coated
· IP20 protection rating with individual dust shutters
Possibility of Individual port colour coding through coloured shutter
· up to 6 LANmark RJ45 or GG45 Snap-In jacks
· up to 6 SC Snap-In couplers (6 fibres)
· up to 3 SC duplex Snap-In couplers (6 fibres)
· up to 6 LC duplex Snap-In couplers (12 fibres)
·
· Mix of copper jacks and optic adapters possible
· Strain release through cable gland or tie wraps
· Removable (screws) side cover
Type of cables
· Shielded Industrial Category 6 and 7 data cables, AWG 24 to AWG23
· Fiber optic cables up to 15mm diameter
· Simplex – Duplex and breakout fibre optic cables
· Tight buffer or loose tube fibre optic cables
· Pre-terminated cablesN439.4SNB Nexans LANmark-OF Sliding Patch Panels
290.00 AEDAdd to cartN439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.- Cat6 Accessories, Cat6 Patch Panels, Cat6a Accessories, Cat6a Patch Panels, NEXANS, Structured Networking
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
114.00 AEDAdd to cartN521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation. N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
505.75 AEDAdd to cartN890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed around the splice and the metal wire provides strength so that the splice is well protected.N890.090 Nexans LANmark-OF Splice Cassette Heat Shrink Protectors
45.70 AEDAdd to cartN890.090 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques. The cassette protects the fusion splices and holds them in position. The splice cassettes with heatshrink protectors can be used for both 250 and 900 µm coated fibres. Hence these cassettes are compatible with LANmarkOF Tight Buffer, Loose Tube and MicroBundle cables. Splicing with heat shrink protectors can also be used for both LANmark OF Maxistrip and Tight Buffer Pigtails. The cassettes have 12 splice positions. When using LANmarkOF Maxistrip Pigtails 2 protectors can be stacked on top of each other increasing capacity to 24 splices per cassette. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmarkOF patch panels (N439.*) and LANsense OF sliding preloaded patch panels (N883.2B*). The splice cassettes are fixed to each other at the back of the cassettes with the
provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.
The cassette facilitates 2 rings of routing: an inner ring for the fibres of the pigtails and an outer ring for the fibres of the cable.N890.092 Nexans LANmark-OF Splice Cassette Cover
13.50 AEDAdd to cartN890.092 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques.
The cassette protects the fusion splices and holds them in position. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmark-OF patch panels (N439.*) and LANsense-OF sliding preloaded patch panels (N883.2B*). These splice cassettes are fixed to each other at the back of the cassettes with the provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.NCB-6AUGRYR-305 D-link Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
600.00 AEDAdd to cartD-link NCB-6AUGRYR-305
Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
DESCRIPTION
•Enhanced performance cable for transmission of high
speed data, digital and analogue voice and video (RGB)
signals on LANs
•Supports Gigabit Ethernet (10GbaseT) standard
•Operates at a bandwidth of 500MHzConductor : 23 AWG Solid bare Copper
Insulation : High Density Polyethylene
Pairs : 2 Insulated conductors twisted togetherNCB-6AUGRYR1-1 Dlink Cat6A 10G UTP 24 AWG PVC Round Patch Cord – 1m – Grey Colour
12.00 AEDAdd to cartDlink NCB-6AUGRYR1-1
Cat6A 10G UTP 24 AWG PVC Round Patch Cord – 1m – Grey Colour
DESCRIPTION
• 4 Pairs Unshielded Twisted Pair (UTP) Cable
• Conductor Metal: Bare Copper
• Color Code: Gray
• Conductor: 24 AWG• RJ-45 8P for Transparence color.
• Gold plated: 30U”
• Contact blade: Phosphor BronzeNCB-C6UGRYR1-05 D-Link Cat6 UTP 24AWG Patch Cord, 0.5M
7.00 AEDAdd to cartD-Link NCB-C6UGRYR1-05
D-Link Cat6 UTP 24AWG Patch Cord, 0.5M
SPECIFICATIONS
• 4 Pairs Unshielded Twisted Pair (UTP) Cable
• Conductor Metal: Bare Copper
• Color Code: Gray
• Conductor: 24 AWG
• Insulation Material: HD-PE
• Jacket Material: PVC UL94V-0
• Heat-resistant: 60oC minimum (Temperature limited)MODULAR CONNECTOR/PLUG
• RJ-45 8P for Transparence color.
• Gold plated: 30U”
• Contact blade: Phosphor Bronze
• Temperature range: -10 ~ 80oC
• Dielectric withstanding voltage: 500V AC
• Insulation resistance: 35M Ohm (max.)
• Durability: 750 matching cycles
• Cable-to-plug tensile strength: 20lbs (89N) (min.)
• UL applications: 250V AC, 2A (max.)
• Polycarbonate (PC) UL94-V-0Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
2,100.00 AEDAdd to cartNexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
875.00 AEDAdd to cartNKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
875.00 AEDAdd to cartNKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
22.00 AEDAdd to cartNKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
21.00 AEDAdd to cartPanduit NKFP91BN1NNM001
LC SM OS2 Pigtails
DESCRIPTION
Fiber Size: Pigtails: 900μm tight-buffered fiber
Patch Cords: 1.6mm or 3.0mm duplex jacketed zip cord cable
Cable Jacket Ratings: Riser (OFNR): Per UL 1666 and c(UL) FT-4
Low Smoke Zero
Halogen (LSZH): Per IEC 60332-1, IEC 60754-2, IEC 61034
Connector Types: LC, SC, and STNKJ-C6WHI1B21 D-Link Cat6 UTP Keystone Jack – White Colour
13.00 AEDAdd to cartD-Link NKJ-C6WHI1B21
Cat6 UTP Keystone Jack – White Colour
DESCRIPTION
RJ45 8P 8C 180°C 50u Punch Down Jack
Terminating 4 pairs, 22-26 AWG Cable
Universal labels color coded for T568A
and T568B wiring schemes
Fitting high density keystone panel
UL, ETL certifiedNN01408.3M12 BELDEN 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded
679.00 AEDAdd to cartNN01408.3M12 BELDEN
12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded Product
Description
1U FiberExpress@EASE 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loadedWeight: 2.500 kg
Height: 44 mm
Width: 482 mm
Depth: 251.5 mmFront Connection: Flush
Footprint/Type: LC- BELDEN, Cat6 Accessories, Cat6 Modules & Outlets, Cat6a Accessories, Faceplates & Back Boxes, Structured Networking
NN01520 BELDEN Single Faceplate, White, Empty (WIFI WT2)
9.00 AEDAdd to cartBELDEN NN01520
Single Faceplate, White, Empty (WIFI WT2)
DESCRIPTION
6C (38.5x25mm) Modular Outlet Faceplate
Height: 86 mm
Width: 86 mm
Depth: 10 mm
Packaging: Individually packaged in a plastic bag. NN01521 BELDEN Faceplate 6C Outlet
8.00 AEDAdd to cartBELDEN NN01521
Faceplate 6C Outlet
Product Description
6C (38.5x25mm) Modular Outlet FaceplateHeight: 86 mm
Width: 86 mm
Depth: 10 mm
Packaging: Individually packaged in a plastic bag.Footprint/Type: KeyConnect & MDVO
Plug /Jack Compatibility: RJ45- BELDEN, Cat6 Accessories, Cat6 Modules & Outlets, Cat6a Accessories, Cat6a Modules & Outlets, Structured Networking
NN01526 BELDEN Shutter Module for Faceplates Application, White
9.00 AEDAdd to cartBELDEN NN01526
Shutter Module for Faceplates Application, White
DESCRIPTION
6C (38.5x25mm) Modular Outlet Insert for Faceplate, Adapter Angled, 1 port
Height: 42 mm
Width: 25 mm
Depth: 31 mm
Front Connection: Angled
Packaging: Individually packaged in a plastic bag. - Cat6 Accessories, Cat6 Patch Panels, Cat6a Accessories, Cat6a Patch Panels, D-LINK, Structured Networking
NPP-AL1BLK241 D-Link 24 Port Unloaded Patch Panel 1U Blank
41.00 AEDAdd to cartD-Link NPP-AL1BLK241
24 Port Unloaded Patch Panel 1U Blank
DESCRIPTION
• With cable management bar for improved management
• Accepts Cat5E and Cat6 keystone jacks
• Mounts in standard 19” racks
• UL/RoHS certified NPP-C61BLK241 D-Link 24 Port Cat6 Unshielded Fully Loaded Punch Down Patch Panel 1U- Black Colour
140.00 AEDAdd to cartD-Link NPP-C61BLK241
24 Port Cat6 Unshielded Fully Loaded Punch Down Patch Panel 1U- Black Colour
DESCRIPTION
• Six Port RJ45 modules applied
• ID stripes for identifying port allocations
• IDC: suitable for 22-26 AWG stranded
and solid wire
• Compatible with both 110& Krone
punch down tools
• Improved Cable Management with
optional cable management bar- Fiber Optic Armored Outdoor Cable, OPTRONICS, Single Loose Tube Steel Tape Armoured Cable With Steel Wires
OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
9,000.00 AEDAdd to cartOPTRONICS OFC-LSTW-31-06
Single Loose Tube Steel Tape Armoured Cable With Steel Wires.
Single Loose Tube Metallic Arwoured Cable With Steel Wire Stength Members.
The Gel Filled Single Loose Tube Consists of 2 to 12 250ur Singlemode (G.652.D)
or Multimode (OM1/OM2/OM3/OM4) Fibers And it is Protected by a Water Swellable Tape.
There Is an Option for Low Smoke Zero Halogen (LSZH) or Polyethelene (PE) Jacket.
