Your cart is currently empty.
Latest Products
-
HIK VISION DS-2CD1143G0-I
263.00 AEDAdd to cartHIK VISION DS-2CD1143G0-I
- High quality imaging with 4 MP resolution
- Efficient H.265+ compression technology
- Clear imaging even with strong back lighting due to 120 dB WDR
- Water and dust resistant (IP67) and vandal resistant (IK10)
- EXIR 2.0: advanced infrared technology with long IR range
-
HIK VISION DS-2CD1021-I
165.00 AEDAdd to cartHIK VISION DS-2CD1021-I
1/3″ Progressive Scan CMOS; Compression: H.264 / H.264+; Lens: f = 2.8 mm (viewing angle 105,8°); Record: main stream 1920 × 1080, 1280 × 960, 1280 × 720 – 25 fps, additional stream 704×576, 640 × 480, 352×288, 320 × 240 – 25 fps; IR illumination up to 30 m. Power supply DC 12 V / PoE.
-
-
HIK VISION DS-7700NI-K4 SERIES NVR
1,078.00 AEDAdd to cartHIK VISION DS-7700NI-K4 SERIES NVR
- Up to 32 channel IP cameras can be connected
- Supports decoding H.265+/H.265/H.264+/H.264 video formats
- Up to 8-ch @ 1080p decoding capacity
- Up to 256 Mbps high incoming bandwidth ensures IP cameras can be connected
-
-
-
HIK VISION DS-7204HQHI-K/P DVR
217.00 AEDAdd to cartHIK VISION DS-7204HQHI-K/P
- 4 channels and 1 HDD 1U DVR
- Efficient H.265 pro+ compression technology
- Encoding ability up to 1080p @ 15 fps
- 5 signals input adaptively (HDTVI/AHD/CVI/CVBS/IP)
- Up to 6 network cameras can be connected
- Transmits both HDTVI video and power over the same coaxial cable;
Featured Products
-
18292400DL Datwyler Cat 6A cable, SFTP, AWG23 LSOH Orange 500 mtr
2,500.00 AEDAdd to cart18292400DL Datwyler Cat 6A cable, SFTP, AWG23 LSOH Orange 500 mtr
DESCRIPTION
Electrically and mechanically superior quality Cat.6A data cable – exceeds the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and prEN 50288-10-1. Excellent shielding effect due to individually screened pairs and overall copper braid. Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
-
41523000ZY DATWYLER 48F LC Patch Pannel
1,302.00 AEDAdd to cartDATWYLER 41523000ZY
SCOPE OF DELIVERY
Splice box with
– two straight cable entries
– one screwed cable gland M20
– coloured pigtails with measurement report
– FO adapters, fastened by screws
– splice trays with cover
– splice holder for 12 x crimp splice protectors
– Delivery without splicing protection -
19007700DZ 24F Single Mode DATWYLER Fiber Cable
6,951.18 AEDAdd to cartDATWYLER 19007700DZ
DESCRIPTION
Robust, non-metallic fibre optic outdoor and indoor cable with one or two central loose-tubes.
High crush resistance for high transmission reliability.
Easy handling due to cable construction with dry interstices.
Non-metallic rodent protection.
The two coloured ripcords are easy to identify and enable the safe opening of the cable sheath.
Flame retardant halogen-free FR/LS0H sheath. -
GUSND12 BELDEN Indoor/Outdoor Central Loose Tube 12 Fibers OM3
4,200.00 AEDAdd to cartBELDEN GUSND12 (1000 mtr)
Indoor/Outdoor Central Loose Tube 12 Fibers OM3 Product
Product Description
Universal (Indoor/Outdoor) Rodent Protection Central Loose Tube Optical Cable 12 x 50/125-OM3-BI A/I-DQ(ZN)BHTechnical Specifications
Construction Type: Central Loose Tube -
AX102419 BELDEN LC Adaptor
42.00 AEDAdd to cartBELDEN AX102419
Faceplates and Panels – KeyConnect LC Duplex Module Singlemode
General Description:
Keystone Module LC Duplex Singlemode, Almond
Usage (Overall)
Suitable Applications: FiberExpress Solutions, Backbone, Telecommunications Room, Main Distribution Room
Related Parts: – Compatible KeyConnect-style Faceplate and Patch Panel -
GUSN812 BELDEN 12 Fiber Cable Non Armoured SM
25,000.00 AEDAdd to cartBELDEN GUSN812 (1000 mtr)
Indoor/Outdoor Central Loose Tube 12 Fibers G652D/G657A1-OS2
Product Description
Universal (Indoor/Outdoor) Rodent Protection Central Loose Tube Optical Cable 12 x 9/125-G652D/G657A1-OS2 A/I-DQ(ZN)BH
Technical Specifications
Construction Type:Central Loose Tube -
FT3LC900PS01 BELDEN LC SIMPLEX PIGTAIL OM3 LC 50 Micron 2M
315.00 AEDAdd to cartBELDEN FT3LC900PS01 Cable Assemblies – FX FIELD-TERMINATION PIGTAIL
General Description:
FX FIELD-TERMINATION PIGTAIL, OM3, LC SIMPLEX, TIGHT BUFFER 900 UM, SINGLE-ENDED, 2M,
AQUA BUFFERMaterials
Materials:
Description Type Material Color
Connector end 1 LC Plastic Aqua
Boot end 1 Rubber Aqua
Ferrule end 1 2.5mm Zirconia-Ceramic White
Jacket 900 um Tight Buffer OFN Aqua
On-Sale Products
-
VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
100.00 AED60.00 AEDAdd to cart3M VOL-OCK6-U
Description
• Tool-less jack … easy and quick to install
… fast reliable connection in record time: all 8 copper conductors are effortlessly
wired in a single operation
… quality of connection by design: not dependant on tool condition or operator skills,
just listen for the click
… consistent results: the length of untwisted pairs and the length between the end of the
conductor and the IDC contacts are always kept to a minimum, by design
• Re-usable … if a wiring mistake is made there is no need to use a new jack
… no time wasted waiting for another delivery
• Shallow depth, cable entry from
top or bottom
… easier cable management
… more space and flexibility to ensure the cable minimum bend radius is never compromised
– allows a wide range of cable routing options
– can be used with low profile trunking and boxes
• Keystone mounting … compatibility between Volition copper and fibre jacks and many other accessories on the market
using the standard keystone mounting
• UTP, FTP and STP 360° shielded versions
have the same ‘one-click’ tool-less design
… solutions for all levels of EMC protection using the same accessories means less training
• Accepts both solid conductors from AWG
26 to 22 and stranded conductors
… compatible with all cables on the market and enables ‘jack to plug’ cables to be manufactured
using stranded conductors (for use in open office architectures)
• Integral shutter … increased dust protection, especially during installation or in a dirty environment
… no additional shuttering required on faceplates
… higher port density
… allows direct mounting into floor -
N205.617 Nexans LANmark-OF Snap-In Adaptor
24.00 AED21.50 AEDAdd to cartN205.617 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
-
N439.4SNB Nexans LANmark-OF Sliding Patch Panels
305.00 AED290.00 AEDAdd to cartN439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies. -
N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
37.00 AED35.00 AEDAdd to cartN11A.U1F030OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services. -
N11A.U1F020OK Nexans LANmark-6A Ultim Patch Cord, 2 Meters
34.00 AED31.00 AEDAdd to cartN11A.U1F020OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application. LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points. They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels. Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.
