Shop
TECHLOGISK TL-FPT-SC/APC-09-1.5
16.80 AEDAdd to cartTECHLOGISK TL-FPT-SC/APC-09-1.5
Techlogiks Single Mode fiber pigtails are available in a variety of colours to complement any network, custom
configurations and performances. Full choice of available connector types like LC/SC/ST/FC/E2000/MTRJ etc..TL-ANT2409A TP-Link 2.4GHz 9dBi Outdoor Directional Panel Antenna, 1m Cable, 1 RP-SMA Connector, Point-to-Point Application, Andustrial Material for Outdoor Use
70.00 AEDAdd to cartTP-Link TL-ANT2409A
2.4GHz 9dBi Outdoor Directional Panel antenna, 1m Cable, 1 RP-SMA Connector, Point-to-Point Application, Industrial Material for Outdoor Use
- 9dBi directional operation provides extended point to point connection or indoor and outdoor area coverage
- Features 100cm(39.4 in) CFD-200 low loss cable for flexible deployment
- RP-SMA Male connector, works with most of access points / wireless routers
- Provides easy installation mounting kits
TL-BULKUTPC6A TECHLOGIKS- 04 Pair Cat6A 23AWG U/UTP PVC Cable 305mtr/Box Grey
630.00 AEDAdd to cartTECHLOGIKS TL-BULKUTPC6A
04 Pair Cat6A 23AWG U/UTP PVC Cable 305mtr/Box Grey
DESCRIPTION
Techlogiks Cat 6 unshielded solid cable in a 23 AWG conductor features more stringent specifications
for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and applies to
1000Base-T, 1000Base-TX, 100 Base-T4, 100Base-TX, 100VG-AnyLAN, 155Mbps ATM, 622Mbps ATM.TL-BULKUTPC6ALZ TECHLOGIKS- 04 Pair CAT6A 23AWG U/UTP LSZH Cable 305mtr/Box Purple
686.00 AEDAdd to cartTECHLOGIKS TL-BULKUTPC6ALZ
04 Pair CAT6A 23AWG U/UTP LSZH Cable 305mtr/Box Purple
DESCRIPTION
Techlogiks Cat 6A UTP solid cable in a 23 AWG conductor features more stringent specifications for crosstalk and
system noise. The cable standard provides performance of up to 500 MHz and applies to 10 GBase-T, 1000Base-T,
1000Base-TX, 100 Base-T4, 100Base-TX, 100VG-AnyLAN, 155Mbps ATM, 622Mbps ATMTL-BULKUTPC6PE TECHLOGIKS Category 6 UTP Unarmored Outdoor Cable 23 AWG 500 ,Meters Black
1,190.00 AEDAdd to cartTECHLOGIKS TL-BULKUTPC6PE
Category 6 UTP Unarmored Outdoor Cable 23 AWG 500 ,Meters Black
DESCRIPTION
Techlogiks Cat 6 unshielded outdoor cable in a 23 AWG conductor features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and applies to 1000Base-T,
Construction UTP
Number of Pairs 4 Pair
AWG 23AWG
Conductor Dimension (mm) 0.570
Solid or Stranded;
Bare or Tinned Solid Bare CopperTL-CAC-PDU06 TECHLOGIKS- 06 Way UK Type 13amp 220volt PDU with 1.8mtr Cable without Switch,
98.00 AEDAdd to cartTECHLOGIKS TL-CAC-PDU06
06 Way UK Type 13amp 220volt PDU with 1.8mtr Cable without Switch
DESCRIPTION
• Power supply: 85-265VAC.
• 6 Way, 10 Way, 12 Way
• 13 Amps, 16 Amps, 32 Amps
• Industrial PDU’s are also available.TL-FAP-FC-MM-SX TECHLOGIKS FC Multi Mode OM2 Adapters
10.00 AEDAdd to cartTECHLOGIKS TL-FAP-FC-MM-SX
FC Multi Mode OM2 Adapters
DESCRIPTION
Techlogiks offers a wide range of multi-mode optical couplers/adapters with various connector and Mounting options.
Plastic or metal housing
Simplex, Duplex or Quadruple
Complete line of connector types: eg, SC/ST/FC/LC/MTRJ/MU/MPOTL-FAP-SC-SM-DX TECHLOGIKS Adaptor SC/UPC Duplex Single Mode- Blue
8.00 AEDAdd to cartTECHLOGIKS TL-FAP-SC-SM-DX
Adaptor SC/UPC Duplex Single Mode- Blue
DESCRIPTION
Techlogiks offers a wide range of optical couplers/adapters with various connector and Mounting options
Plastic or metal housing
Simplex, Duplex or QuadrupleTL-FAP-SC-SM-SX TECHLOGIKS-Adaptor SC/UPC Simplex Single Mode- Blue
4.00 AEDAdd to cartTECHLOGIKS TL-FAP-SC-SM-SX
Adaptor SC/UPC Simplex Single Mode- Blue
DESCRIPTION
Techlogiks offers a wide range of optical couplers/adapters with various connector and Mounting options
Plastic or metal housing
Simplex, Duplex or QuadrupleHybrid versions available
Low insertion loss
High precision alignment.TL-FDB-W24-SC-SX Techlogiks Wall Mount Fiber Distribution Box
650.00 AEDAdd to cartTechlogiks TL-FDB-W24-SC-SX
Wall Mount Fiber Distribution Box
Applications:
- Telecommunication Networks
- Local Area Networks
- FTTH
- CATV Networks
- Active Device Termination
Features & Benefits:
- Low excess loss & high
- Retractable Splicing Tray
- Convenience and ease of handling
- Indoor Use, Outdoor use customable
Distribution Shelf :-
Shelves are designed with enough capacity for fiber splices and it is suitable for 12 to 72 fiber splices. It is made from fabricated mildvsteel not less than 1.2mm thick or equivalent and painted in good condition. The Fiber Distribution Frame shall be of corrsion resistance and robust construction and shall allow both top or bottom entry for access to this splice trays
TL-FDB-W48-LC-SX TECHLOGIKS 48 Port Multi Mode LC Wall Mount Patch Panel
490.00 AEDAdd to cartTECHLOGIKS TL-FDB-W48-LC-SX
48 Port Multi Mode LC Wall Mount Patch Panel
DESCRIPTION
• Low excess loss & high performance.
• Retractable Splicing Tray
• Convenience and ease of handling
• Indoor Use, Outdoor use customableTL-FDF-R1-24-SC-SX TECHLOGIKS-
196.00 AEDAdd to cartTECHLOGIKS TL-FDF-R1-24-SC-SX
24 Port SC Simplex or LC Duplex 19″ Unloaded 1U Fixed Type Fiber Patch Panel with Splice Trey- Grey
DESCRIPTION
Techlogiks 19”rack mount optical fiber distribution frame is available from 12 to 144 fiber capacity and suitable
for different types of fiber adaptors like LC, SC, ST, FC, E2000, MTRJ. It includes the metallic casing, adapter plate,
splice tray and other necessary materials for the termination of optical fiber cable. Separate storage shelf and
distribution shelf can be offered if required.TL-FPC-LCLC-OM4-DX-003 TECHLOGIKS FC-FC OM4 Multi Mode Duplex Patch Cord, 15 Meters
145.00 AEDAdd to cartTECHLOGIKS TL-FPC-LCLC-OM4-DX-003
LC-LC OM4 Multi Mode Duplex Patch Cord, 15 Meters
DESCRIPTION
Used with both LED and VCSEL laser light sources
Designed for use in 10/40/100 – Gigabit Ethernet applications
Simplex and Duplex options available
100% factory tested using optical interferometer- Cat6 Accessories, Cat6 Modules & Outlets, Cat6a Accessories, Faceplates & Back Boxes, Structured Networking, Techlogiks
TL-FPS1 TECHLOGIKS- Single Faceplate with Shutter Type-WT
4.00 AEDAdd to cartTECHLOGIKS TL-FPS1
Single Faceplate with Shutter Type-WT
DESCRIPTION
Techlogiks wall plate and accessories are made from high-impact ABS plastic, available in one, two, four and
six ports. Perfectly blends into the decor of your home or office, protects and hides your network connections,
accepts all keystone inserts.Fit for RJ45 keystone jack outlet plates
Packing includes the modular faceplate and two mounting screws for Installation TL-FPT-LC-09-1.5 TECHLOGIKS- 09/125 OS2 LC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5mtr
13.50 AEDAdd to cartTECHLOGIKS TL-FPT-LC-09-1.5
09/125 OS2 LC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5 mtr
DESCRIPTION
Techlogiks Single Mode fiber pigtails are available in a variety of colours to complement any network, custom
configurations and performances. Full choice of available connector types like LC/SC/ST/FC/E2000/MTRJ etc..100% optically tested in factory
Tight or semi-tight buffered 900um cable available
Visual inspection of endface by 400x microscope.
Low insertion loss and back reflectionTL-FPT-SC-09-1.5 TECHLOGIKS OS2 SC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5mtr
13.00 AEDAdd to cartTECHLOGIKS TL-FPT-SC-09-1.5
OS2 SC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5mtr
DESCRIPTION
100% optically tested in factory
Tight or semi-tight buffered 900um cable available
Visual inspection of endface by 400x microscope.
Low insertion loss and back reflection.TL-FPT-ST-09-1.5 TECHLOGIKS- 09/125 OS2 ST/UPC T/Buff fiber 900um Single Mode Pigtail 1.5mtr
13.00 AEDAdd to cartTECHLOGIKS TL-FPT-ST-09-1.5
09/125 OS2 ST/UPC T/Buff fiber 900um Single Mode Pigtail 1.5 mtr
DESCRIPTION
Techlogiks Single Mode fiber pigtails are available in a variety of colours to complement any network, custom
configurations and performances. Full choice of available connector types like LC/SC/ST/FC/E2000/MTRJ etc..100% optically tested in factory
Tight or semi-tight buffered 900um cable available
Visual inspection of endface by 400x microscope.
Low insertion loss and back reflection.TL-FS42810 TECHLOGIKS- 42U 800(W)x1000(D) Free Stand Cabinet with Front Single Glass Door with Lock
3,220.00 AEDAdd to cartTECHLOGIKS TL-FS42810
42U 800(W)x1000(D) Free Stand Cabinet with Front Single Glass Door with Lock
DESCRIPTION
Techlogiks Free Standing Cabinets has an available height ranging from 12U to 47U with a width of 600mm,
800mm and depth of 600mm, 800mm and 1000mm. It is a rugged type, large loading and has a maximum static loading of 800 kg. The rack is completely providing an accessories such as an adjustable feet, removable side panels, heavy duty castors, several lock cable entry from top and bottom panel with adjustable sizes, an
optional plinth which enables the rack to stand in a fixed position, and 4 way fans.
• Good compatibility, adapt to more servers. Perfect ventilation
• Vented front door and rear door enable ventilation and reliable operation
• The top and bottom wiring channel can be closed and adjusted.
• Optional plinth to meet under base wiring, ventilation and rat-proof
• Rack’s side panel can be easily assembled.TL-JHC6AU TECHLOGIKS- RJ45 CAT6A Unshielded 18 Degree Keystone jack-WT
15.50 AEDAdd to cartTECHLOGIKS TL-JHC6AU
RJ45 CAT6A Unshielded 18 Degree Keystone jack-WT
DESCRIPTION
Techlogiks Cat 6A Keystone Jack is designed to easily snap in and out of the wall outlet, patch panel and surface mount box. It is individually terminated using Insulation Displacement Connectors (IDC) with punch down tool for quick installation. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards up to 10GHz
TL-JHC6U TECHLOGIKS RJ45 CAT6 Unshielded 90 Degree Keystone Jack-WT (For Face plate)
10.00 AEDAdd to cartTECHLOGIKS TL-JHC6U
RJ45 CAT6 Unshielded 90 Degree Keystone Jack-WT (For Face plate)
DESCRIPTION
Techlogiks Cat 6 Unshielded Keystone Jack is designed to easily snap in and out of the wall outlet, patch panel and
surface mount box. It is individually terminated using Insulation Displacement Connectors (IDC) with punch down
tool for quick installation.TL-PCC6UH3GY TECHLOGIKS- RJ45 Patch Cord UTP, Category 6, Standard Plug, PVC 3mtr Grey
14.00 AEDAdd to cartTECHLOGIKS TL-PCC6UH3GY
RJ45 Patch Cord UTP, Category 6, Standard Plug, PVC 3mtr Grey
DESCRIPTION
Techlogiks Cat 6 unshielded patch cords, made of high performance UTP components available in broad range of
lengths and easy to trace colours. They are designed to meet or exceed all Cat6 specifications. It has 24 AWG conductor
securely mated with a patented RJ45 plug design to deliver superior electrical performance with excellent
repeatability. The unique anti-snagging feature simplifies removal and replacement of patch cords.Unique design of Cat6 RJ45 modular plugs and line pair decrease cross talk and increase allowance.
Excellent attenuation and crosstalk continuity
Meet or exceed the requirement of Cat6 UTP system
Lead-free & RoHS2 compliant.TL-PCC6UH5GY TECHLOGIKS- RJ45 Patch Cord UTP, Category 6, Standard Plug, PVC 5mtr Grey
17.00 AEDAdd to cartTECHLOGIKS TL-PCC6UH5GY
RJ45 Patch Cord UTP, Category 6, Standard Plug, PVC 5mtr Grey
DESCRIPTION
Techlogiks Cat 6 unshielded patch cords, made of high performance UTP components available in broad range of
lengths and easy to trace colours. They are designed to meet or exceed all Cat6 specifications. It has 24 AWG conductor
securely mated with a patented RJ45 plug design to deliver superior electrical performance with excellent
repeatability. The unique anti-snagging feature simplifies removal and replacement of patch cords.TL-PNC6-UT24M Techlogiks 24 Ports 01U 19Inch Fully Loaded Patch Panel with Rear Cable Management
285.00 AEDAdd to cartTechlogiks
Category 6 Unshielded Patch Panel
Techlogiks Cat 6 modular patch panel utilizes quad frame modules offered with 8-contact inserts wired to Insulation Displacement Connectors (IDC}. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards.
Applications
- 10008ASE-T, 100BASE-Tx, 10BASE-T, 155M ATM, 4/16MB Token
- 100Mbps TP-PMD, /SON, ADSL, Analog & Digital Voice {VoIP)/
- Power over Ethernet (PoE}, Control Signal.
Standards
- Lead-free & RoHS2
- ANSl/TIA-568-C.2, ANSl/TIA- 1096-A {FCC Part 68}, /SO/IEC 11801 2nd edition and CENELEC EN 50173-1.
- Level A reliability requirements of /EC 60603-7-2 and /EC 60603-7-4 for
- Compatible for T568A and T5688 wiring
TL-PNC6-UT48M TECHLOGIKS- 48 Ports 02U 19Inch Fully loaded Patch Panel with Rear Cable Management
448.00 AEDAdd to cartTECHLOGIKS TL-PNC6-UT48M
48 Ports 02U 19Inch Fully loaded Patch Panel with Rear Cable Management
DESCRIPTION
Techlogiks Cat 6 modular patch panel utilizes quad frame modules offered with 8-contact inserts wired to Insulation Displacement Connectors (IDC}. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards.
TL-PNC6UT24 TECHLOGIKS- 24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
26.00 AEDAdd to cartTECHLOGIKS TL-PNC6UT24
24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
DESCRIPTION
Entire steel 24 ports UTP blank patch panel. UTP Cat.6 keystone jacks can be assembled on this panel.
The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.
Fitting for horizontal distribution in the equipment’s room and equipment’s connecting.TL-POE150S TP-Link PoE Injector Adapter, IEEE 802.3af Compliant, Data and Power Carried Over the Same Cable up to 100 meters, Plastic Case, Pocket Size, Plug and Play
65.00 AEDAdd to cartTP-LinkTL-POE150S
PoE Injector Adapter, IEEE 802.3af Compliant, Data and Power Carried Over the Same Cable up to 100 meters, Plastic Case, Pocket Size, Plug and Play
- IEEE 802.3af compliant
- Auto-determine the necessary power requirements
- Gigabit speed support
TP LINK : T1500G-10PS(TL-SG2210P)(UN)
763.00 AEDAdd to cartTP LINK : T1500G-10PS(TL-SG2210P)(UN)
TP-Link Gigabit Smart Switch T1500G-10PS is equipped with 8 gigabit RJ45 ports and 2 SFP slots, all
RJ45 Ports support the PoE standard with total PoE power budget of 53W and useful PoE power
management features. The switch provides high performance, enterprise-level QoS, useful security
strategies and rich layer 2 management features.
TP-Link’s Gigabit Smart Switch T1500G-10PS is especially designed for the small and medium businessTS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
134.41 AEDAdd to cartRITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)TS 8611.070 RITTAL Comfort Handle
160.77 AEDAdd to cartRITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).TS 8611.080 RITTAL Handle Adapter For Comfort Handle
58.00 AEDAdd to cartRITTAL TS 8611.080
Handle Adapter For Comfort Handle
Product features
Packaging unit: 1 pc(s).
Weight/packaging
unit:
0.08 kg (0.2 lb.)
EAN: 4028177211933Product description
(long):
TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035TS 8611.180 RITTAL Lock Insert For Handle Systems
60.00 AEDAdd to cartRITTAL TS 8611.180
Lock Insert For Handle Systems
Product description
Supply includes: with 2 keys
Product features
Installation in handle
system:
Comfort handle for lock inserts
Mini-comfort handle for lock inserts
Lock Insert: Security lock insert no. 3524 E
Packaging unit: 1 pc(s).
Weight/packaging unit: 0.04 kg (0.1 lb.)
Product description (long):
TS Lock insert for handle systems, lock-insert locking Nr. 3524 ETS 8612.080 RITTAL Cabinet Chassis 17 x 73 mm
271.57 AEDAdd to cartRITTAL TS 8612.080
Cabinet Chassis 17 x 73 mm
Product description
Version: For the inner mounting level and for mounting on doors
Description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply
position in the TS holes and secure.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: The rail for interior installation is required when installing in CM, TP
Supply includes: Assembly screws
Product features
Suitable for: Width/depth: 800 mm
Dimensions: Length: 790 mm (31 ˝)
Installation options: On the vertical TS enclosure profile: on the outer mounting level, all-round, height-offset
For SE, may additionally be mounted on the top horizontal section in the depth
In the tubular door frame for TS, SE and PC
In CM and TP via rails for interior installation: in width, for inner mounting level
Simply locate installation kit into component shelves and secure. One pack is sufficient for 2
component shelves. 100 kg surface load, static
Suitable for door
width:900 mmPackaging unit: 4 pc(s).
Weight/packaging
unit:
3.58 kg (7.9 lb.)Product description
(long):
TS TS punched section with mounting flange, 17 x 73 mm, for inner mounting level: for W/D:
800 mm, for door width: 900 mm, L: 790 mmTS- 8601.600 RITTAL Base/Plinth Components, Front and Rear, 100 mm Sheet Steel
151.05 AEDAdd to cartRITTAL TS- 8601.600
Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly partsDimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kgVDIB17766UWE_E Schneider JACK CAT 6 KEYSTONE UTP – White
12.00 AEDAdd to cartSchneider VDIB17766UWE_E
JACK CAT 6 KEYSTONE UTP – White
DESCRIPTION
Product type Keystone modular jack
Provided equipment Without shutter
Colour tint White
Type of packing Plastic bag and carton
Quantity per set Set of 1
Connector type RJ45
AWG gauge AWG 24…AWG 22
Tool type Punch down tool
Communication network category 6VIC3-2FXS/DID Cisco Voice Interface Card Includes Two FXS Ports.
1,120.00 AEDAdd to cartCisco VIC3-2FXS/DID
Specification
VIC3-2FXS/DID Specification
General
Device Type Voice / fax module
Form Factor Internal
Modem
Connectivity
Technology
Wired
Analog Ports
Qty
2
Expansion / Connectivity
Interfaces 2 x network – FXS/DID – RJ-11
Compatible
Slots
1 x expansion slot
Miscellaneous
Compliant
Standards
FCC Class B certified, UL 1950
Software / System Requirements
OS Required Cisco IOS 12.4(15)XZVOL-FPUK-2K 3M (2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
13.00 AEDAdd to cart3M VOL-FPUK-2K
(2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
DESCRIPTION
A wide range of face plates and boxes are available for the ‘K’
series Jacks which ensure easy fitting and smart presentation of
the RJ45 outlet. Vertical and 30° angled versions are offered in
local country adaptations giving the ability to surface or flush
mount. The Keystone mounting feature of the Jack may allow you to
use VF-45TM or other Keystone boxes or face plates.
Different colour options are available in some versions. A label
holder and white application icon (coloured icons are available) finish
the presentation to give a smart and functional appearance.
The choice of UTP, FTP or STP 360° braid or foil connection offers
you the required electromagnetic compatibility level you require.VOL-FPUK-LJ6C-F2K 3M Faceplates and Adapters LJ6C Style
16.00 AEDAdd to cart3M VOL-FPUK-LJ6C-F2K
UK (86 x 86mm) Faceplates and Adapters LJ6C Style
Specification
Technical characteristics
Flat faceplates – size (h x w x d)
Single gang – 86 x 86 x 10mm
Double gang – 86 x 147 x 10mm
Faceplate apertures (h x w)
LJ6C – single gang single slot –38.7 x 25mmSingle gang double LJ6C – 2 slot –38.7 x 25mm
Double gang 4 slot –38.7 x 25mm
Adapters (h x w) 38.7 x 25mm
VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
60.00 AEDAdd to cart3M VOL-OCK6-U
Description
• Tool-less jack … easy and quick to install
… fast reliable connection in record time: all 8 copper conductors are effortlessly
wired in a single operation
… quality of connection by design: not dependant on tool condition or operator skills,
just listen for the click
… consistent results: the length of untwisted pairs and the length between the end of the
conductor and the IDC contacts are always kept to a minimum, by design
• Re-usable … if a wiring mistake is made there is no need to use a new jack
… no time wasted waiting for another delivery
• Shallow depth, cable entry from
top or bottom
… easier cable management
… more space and flexibility to ensure the cable minimum bend radius is never compromised
– allows a wide range of cable routing options
– can be used with low profile trunking and boxes
• Keystone mounting … compatibility between Volition copper and fibre jacks and many other accessories on the market
using the standard keystone mounting
• UTP, FTP and STP 360° shielded versions
have the same ‘one-click’ tool-less design
… solutions for all levels of EMC protection using the same accessories means less training
• Accepts both solid conductors from AWG
26 to 22 and stranded conductors
… compatible with all cables on the market and enables ‘jack to plug’ cables to be manufactured
using stranded conductors (for use in open office architectures)
• Integral shutter … increased dust protection, especially during installation or in a dirty environment
… no additional shuttering required on faceplates
… higher port density
… allows direct mounting into floorVOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
175.00 AEDAdd to cart3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacksVWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
2,940.00 AEDAdd to cartCisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1 Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
WBS210 TP-Link Outdoor Wireless Base Station: WBS210 (2.4GHz, 300Mbps)
233.00 AEDAdd to cartOutdoor Wireless Base Station: WBS210 (2.4GHz, 300Mbps)
DESCRIPTION
Outdoor wireless base station TP-Link WBS210 is an effective solution for building outdoor wireless networks. Thanks to a central management system, it is ideal for point-to-point and point-to-multipoint architectures. High performance combined with ease of use make the WBS210 a great choice for both business and and home applications.- Wireless N speed up to 300 Mbps
- Selectable bandwidth of 5/10/20/40 MHz
- Adjustable Tx output power
- Two RP-SMA connectors for connecting MIMO antennas
- 10/100 Mbps Ethernet passive PoE port + 10/100 Mbps Ethernet port
WMPFSE Panduit 1U Cable Manager
84.00 AEDAdd to cartPanduit WMPFSE
1U Cable Manager
DESCRIPTION
Horizontal cable managers shall be capable of managing
cables on the front and rear of any 19″ EIA rack. The
manager shall consist of a 1-piece construction that is
molded out of plastic. Horizontal managers shall have
pass through holes that incorporate integral bend radius
control as well as fingers with rounded edges. The
manager shall have rigid end fingers that incorporate
integral bend radius control. Hinged covers shall allow
access to the cable pathway without having to completely
remove the cover from the manager.WS-C2960+24LC-S Cisco Switch LC-S 24 Port
5,222.00 AEDAdd to cartCisco Switch WS-C2960+24LC-S
Specifications
Type Fixed Topology Ethernet (10/100BaseTX)
Ethernet (10/100/1000BaseT)
Gigabit Ethernet (SFP)Maximum Port density 8 10/100 PoE ports, 16 10/100 ports Uplinks 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Modular/Expansion Slots n/a Architecture Layer 2 Switching (basic connectivity), Voice Enabled Form Factor Fixed, Rack Mountable, Standalone/Clustering Dimensions 1.73 x 17.5 x 13 in. DRAM 64 MB WS-C2960+24TC-S Cisco Switch TC-S 24 Port
1,540.00 AEDAdd to cartCisco Product Code WS-C2960+24TC-S
Enclosure Type 1 RU
Feature Set LAN Lite
Uplink Interfaces 2 (SFP or 1000BASE-T)
Ports 24 x 10/100 Ethernet Interfaces
Forwarding Bandwidth 16 Gbps
DRAM 128 MB
Flash Memory 64 MB
Dimensions 4.4 x 45.0 x 24.2 cm
Package Weight 7.73 KgSpecification
Configurations
10/100 Ethernet Interfaces – 24
Uplink Interfaces – 2 (SFP or 1000BASE-T)
Cisco IOS Software Feature Set – LAN LiteWS-C2960X-24PS-L Cisco Catalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN Base
5,166.00 AEDAdd to cartCisco WS-C2960X-24PS-LCatalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN BaseDESCRIPTIONmodel info: WS-2960X-24PS-L
enclosure type Rack-mountable – 1U
Ports 24 x 10/100/1000 + 4 x 1G SFP
Network management Interface 10/100 Mbps Ethernet (RJ-45)
Available PoE Power 370W
Forwarding bandwidth(Gbps) 108Gbps
Maximum stacking number 8
Stack Bandwidth 80G
Forwarding Performance 71.4Mpps
Switching bandwidth 216Gbps
Maximum active VLANs 1023
MAC Address Table Size 16K (default)
CPU APM86392 600MHz dual core
RAM 512 MB
Flash Memory 128 MBWS-C2960X-48TS-L Cisco Catalyst 2960-X 48 GigE, 4 x 1G SFP, LAN Base
8,737.00 AEDAdd to cartCisco WS-C2960X-48TS-L
DESCRIPTION
Catalyst 2960-X 48 GigE, 4 x 1G SFP, LAN BaseProduct Code WS-C2960X-48TS-L
Enclosure Type Rack-mountable – 1U
Feature Set LAN Base
Uplink Interfaces 4 x 1G SFP
Ports 48 x Ethernet 10/100/1000 Gigabit ports
Maximum stacking number 8
Stack bandwidth 80G
Forwarding Bandwidth 108Gbps
Switching Bandwidth 216Gbps
RAM 512MB
Flash Memory 128MB
Dimensions 44.5 cm x 27.9 cm x 4.5 cmWS-C4506-E Cisco Cat4500 E-Series 6-Slot Chassis, Fan, no ps
12,986.00 AEDAdd to cartCisco WS-C4506-E
Cat4500 E-Series 6-Slot Chassis, Fan, no ps
DESCRIPTION
● Integrated wireless controllers in Cisco® Catalyst® switches simplify network architecture and operations.
● Cisco Catalyst solutions – including Cisco Catalyst Instant Access Solution and Smart Operations – save time by automating provisioning and deployment, while simplifying network operations.
● The Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) and Cisco Prime™ Infrastructure give you simplified solutions for management.WS-X4248-RJ45V Cisco Switch 48 ports
840.00 AEDAdd to cartCisco WS-X4248-RJ45V
● 48 ports
● 10/100 (RJ-45)
● Cisco IOS Software Release 12.2(18)EW or later
● IEEE 802.3af PoE and Cisco prestandard
● Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
