Shop
LBB1938/30 BOSCH Power amplifier 1x480W
4,457.00 AEDAdd to cartBOSCH LBB1938/30
Power amplifier 1x480W
DESCRIPTION
480 W power amplifier in a 3U high 19” housing
EN 54‑16 certified
70 V / 100 V and 8 Ohm outputs
Dual inputs with priority switching
100 V input for slave operation on 100 V speaker lineLBB1956/00 BOSCH Call station, 6-zone
1,276.00 AEDAdd to cartBOSCH LBB1956/00
Call station, 6-zone
DESCRIPTION
Stylish six-zone call station for the Plena Voice Alarm System
Six zone selection keys, all-call key and momentary PTT-key for calls
Selectable gain, speech filter, limiter, and output level for improved intelligibility
LED indications for zone selection, fault, and emergency state
Call station extension provides seven additional zone and zone group keysLBB1990/00 BOSCH Controller, 6-zone
7,688.00 AEDAdd to cartBOSCH LBB1990/00
Controller, 6-zone
DESCRIPTION
Remote control of the Plena Voice Alarm System
EN 54‑16 certified and EN 60849 compliant
Emergency (EMG) microphone and background (BGM) zone selections
EMG state and fault indicators
Call monitoring loudspeakerLBC3080/01 BOSCH Metal Fire Dome for LHM0606 (Option)
50.00 AEDAdd to cartBOSCH LBC3080/01
Metal Fire Dome for LHM0606 (Option)
DESCRIPTION
During a fire, the ceiling cavity can allow fire or smoke to spread throughout a building. To inhibit fire entering the
cavity via the ceiling loudspeaker, it can be fitted with an LBC 3080/01 steel fire dome. This is mounted on the
loudspeaker assembly using four self-tapping screws supplied with the fire dome.- BRAND-REX, Cat5E, Cat6 Accessories, Cat6 Patch Panels, Cat6a Accessories, Cat6a Patch Panels, Leviton, Structured Networking
MMCPNLX24SIJ2M-B LEVITON 1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
131.00 AEDAdd to cartLEVITON MMCPNLX24SIJ2M-B
1U SIJ Staggered Panel with Management Suitable for up to 24 Snap in Jacks Black
DESCRIPTION
The 1RU 24-Port Modular Staggered Snap-in-Jack panel offers additional crosstalk performance in unshielded 10GPlus systems. Staggered design provides exceptional crosstalk performance in unshielded Category 6A systems. The 10GPlus system is classified as a Category 6A and Class EA product set that is fully backwards compatible to Cat 6 (Class E) and Cat 5e (Class D) products.
• Port orientation protects pin arrays from dust and enhances contact reliability
• Compatible with all standard 19 inch racks and cabinets - BRAND-REX, Cat5E, Cat6 Accessories, Cat6 Modules & Outlets, Cat6a Accessories, Faceplates & Back Boxes, Leviton, Structured Networking
MMCWDOUNI071 LEVITON 86 x 86mm Single Gang Faceplate with Shuttered module 2 x RJ45 White
9.00 AEDAdd to cartLEVITON MMCWDOUNI071
86 x 86mm Single Gang Faceplate with Shuttered module 2 x RJ45 White
DESCRIPTION
Leviton’s UK style outlets and accessories have been designed to be used in conjunction with our extensive snap-in-jack range, from Cat 5 through to Cat 8. The range is manufactured using robust and durable ABS plastic.
• Supplied in both UNI and Integrated ranges
• Manufactured in ABS plastic
• Single and double gang options
• Faceplates are supplied with M3.5 fixing screws
• Faceplate mounting holes countersunk with pitch of 60.3mm for single and 120.6mm for double gang
• Alternative colors available on request N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
25.00 AEDAdd to cartN116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
25.80 AEDAdd to cartN116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
43.00 AEDAdd to cartN116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
100.00 AEDAdd to cartN116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.N11A.U1F010OK Nexans LANmark-6A Ultim UniBoot Patch Cords, 1 mtrs
26.00 AEDAdd to cartN11A.U1F010OK Nexans
DESCRIPTION
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.N11A.U1F020OK Nexans LANmark-6A Ultim Patch Cord, 2 Meters
31.00 AEDAdd to cartN11A.U1F020OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application. LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel configurations. Ultim cords use stranded cable and as such provide maximum system flexibility for the use at Cross Connects and Consolidation points. They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A cabling channels. Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a ‘Replaceable’ Latch Protector, which can be used for colour coding of different services.N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
35.00 AEDAdd to cartN11A.U1F030OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel configurations. Ultim cords use stranded cable and as such provide maximum
system flexibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate field testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a ‘Replaceable’ Latch Protector, which can be used for colour
coding of different services.N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
20.30 AEDAdd to cartN121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
N121.4MLY Nexans Pigtail LC/UPC Singlemode 9/125 1m Yellow
20.00 AEDAdd to cartPigtail characteristics
· Fibre assembly to terminate cable with fusion splicing
· Suitable for use in patch panels using splice cassettes.
· The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
The LANmarkOF
OM3 pigtails have LANmarkOF
OM3 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.2b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM4 pigtails have LANmarkOF
OM4 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.3b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM5 pigtails have LANmarkOF
OM5 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.4b. The pigtail jacket is Lime Green.
·
The LANmarkOF
SM pigtails have LANmarkOF
SM GIGAliteFLEX fibre
inside. These fibres are bend insensitive and compliant to ITUT
G.657.A1 and to
IEC 60793250,
fibre model B6.a1. The pigtail jacket of the singlemode pigtails is
yellow.N121.5MLA Nexans LANmark-OF Pigtail LC OM3 Maxistrip LSZH 50/125 1m Aqua
19.70 AEDAdd to cartN121.5MLA Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF OM3 pigtails have LANmarkOF OM3 GIGAliteFLEX fibre inside. This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793210, fibre model A1a.2b. The pigtail jacket is Aqua.Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
