Shop
SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
5.00 AEDAdd to cartSCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0SCSAFPUK2WH Opterna Angular Faceplate 86 x 86 mm for 2 Keystone Jack, U.K Standard
6.00 AEDAdd to cartSCSAFPUK2WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
STANDARDS
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0SCSFPUK1WH Opterna Faceplate 86 x 86 mm for 1 Keystone Jack, U.K. Standard
4.50 AEDAdd to cartSCSFPUK1WH Opterna
DESCRIPTION
Opterna faceplates are manufactured of highly stable fire retardant and high density plastics which ensure product durability. It comes with a combination of 1, 2, 3 and 4 ports for your application and to satisfy your customer’s needs. Opterna faceplates are available in two series; the elegant series of Opterna faceplates comes with a peripheral frame providing an elegant appearance where in the screw holes are concealed by the peripheral frame. Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection. The angled design of faceplate maintains the patch cords bend radius and provides extra room behind the back box for storage of cable. The angled faceplate is highly recommended for Category 6 and 6A shielded installations. Other variants of the faceplate series are the floor box adaptors available in straight and angled.
SCSJAC6AUTPBK Opterna 180° Cat 6A Unshielded Keystone jack with T568A/B label, Black
21.00 AEDAdd to cartSCSJAC6AUTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance.
The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief.
The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4SCSJAC6UTPBK Opterna 180° Cat 6 Unshielded Keystone jack with T568A/B label, Black
11.00 AEDAdd to cartSCSJAC6UTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance. The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief. The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4- Cat6a Accessories, Cat6a Patch Cables, OPTERNA, Patch Cords, Structured Cabling, Structured Networking
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
25.00 AEDAdd to cartSCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41 SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
29.00 AEDAdd to cartSCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41SCSPCC6AUTP05MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 5mtr Grey
49.00 AEDAdd to cartSCSPCC6AUTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41SCSPCC6UTP02MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 2 meter grey
12.00 AEDAdd to cartSCSPCC6UTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4SCSPCC6UTP03MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 3 meter grey
14.00 AEDAdd to cartSCSPCC6UTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4SCSPCC6UTP05MLSZHGY Opterna Patch cord UTP, category 6, standard plug , LSZH 5 meter grey
18.00 AEDAdd to cartSCSPCC6UTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSLStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4SCSPPU24UTP Opterna 19” Modular UTP patch panel, 24 ports, 1U, without modules, with rear cable management
56.00 AEDAdd to cartSCSPPU24UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0SCSPPU24UTP10G Opterna 19″ Modular 10G UTP Cat6A Patch Panel 24 ports, 1U, without modules, with rear cable management
84.00 AEDAdd to cartSCSPPU24UTP10G Opterna
DESCRIPTION
Opterna snap-in type UTP patch panel is designed for customized connectors. Based on your design requirements, you can snap your preferred connectors in and make your own style patch panel.
The 10G patch panel has a staggered front port as well as staggered rear cable management to minimize alien crosstalk between jacks and cables and to achieve peak 10G performance.
The evenly designed patch panel provides an efficient and effective method of reducing alien crosstalk (AXT) from neighbouring connectors.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• UL 94 V-0SCSPPU48UTP Opterna 19” Modular UTP patch panel, 48 ports, 2U, without modules, with rear cable management
113.00 AEDAdd to cartSCSPPU48UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0SCSSFTPC6APEBK Cat6A cable roll PVC Opterna Cat6A 23AWG S/FTP PE 4P Cable 305mtr/Box Black
1,120.00 AEDAdd to cartSCSSFTPC6APEBK Opterna
DESCRIPTION
Opterna Category 6A 4-pair S/FTP copper cable forms the foundation of 10 Gigabit Ethernet networks. The cable exceeds Category 6A performance ensuring reliability in delivering 10G network speed and high data throughput.
The category 6A solid cables (S/FTP) has been designed for indoor applications fully supporting the more demanding office and industrial communications requirements including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real-time applications. The cable covers the category 6A requirements for shielded twisted pair cables of 100 Ω and is characterized up to 500 MHz suitable for transmitting data over local area networks (LANs).
The cable’s 8 conductors (4-Pairs) are of solid bare copper with skin-foam polyethylene (PE) insulation and a PVC/LSZH jacket. The two insulated conductors are twisted together to form a pair and the four pairs with its unique pair lay are bundled up to form the basic cable unit. Each twisted pair shielded with an aluminum foil to add physical separation between the four pairs and prevent internal cross talk.
All four pairs are covered with an overall braided screen to provide immunity from electromagnetic interference. Category 6A S/FTP cables provides better immunity and covers a wider spectrum of low frequency with the braided shield and high frequency immunity with the foil shield.
SCSUTP4C6LSZHGN Opterna Cat6 Solid 23AWG UTP LSZH 4Pair Cable 305m/Box – Green
546.00 AEDAdd to cartSCSUTP4C6LSZHGN Opterna
DESCRIPTION
Opterna 4 pair unshielded category 6 solid cables (U/UTP) has been designed for indoor applications and suitable for flawless 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• UL 444
• TIA/EIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC61156-5
• CENELEC EN 50173-1:2011
• EN50288-5-1
• IEC 60603-7-2SCSUTP4C6PEBK Opterna Cat6 Solid 23AWG UTP PE 4Pair Outdoor Cable 305m/Reel Black
630.00 AEDAdd to cartSCSUTP4C6PEBK Opterna
DESCRIPTION
Opterna 4-pair unshielded category 6 solid cables (U/UTP) has been designed for outdoor applications and is suitable for outdoor duct installations. The cable supports 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, Security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a UV stabilized polyethylene (PE) weather resistant jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit. The four pairs are wrapped with an overall polyester tape for extra protection.
Applications
• Outdoor Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC 61156-5
• CENELEC EN 50173-1:2011
• EN50288-6-1SCSUTP4C6PVCGY Opterna Cat6 Solid 23AWG UTP PVC 4Pair Cable 305mtr/Box Grey
504.00 AEDAdd to cartSCSUTP4C6PVCGY Opterna
DESCRIPTION
Opterna 4 pair unshielded category 6 solid cables (U/UTP) has been designed for indoor applications and suitable for flawless 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• UL 444
• TIA/EIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC61156-5
• CENELEC EN 50173-1:2011
• EN50288-5-1
• IEC 60603-7-2SCSUUTPC6ALSZHGY Cat6A cable roll PVC Opterna Cat6A 23AWG U/UTP LSZH 4P Cable 305mtr/Box Grey
875.00 AEDAdd to cartSCSUUTPC6ALSZHGY Opterna
DESCRIPTION
Opterna Category 6A 4-pair U/UTP copper cable forms the foundation of 10 Gigabit Ethernet networks. The cable exceeds Category 6A performance ensuring reliability in delivering 10G network speed, low BER and high data throughput.
Opterna 4 pair category 6A solid cables (U/UTP) has been designed for indoor applications fully supporting the more demanding office and industrial communications requirements including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real-time applications.
The cable covers the category 6A requirements for twisted pair cables of 100 Ω and is characterized up to 500 MHz suitable for transmitting data over local area networks (LANs).
The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. The two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Standards
• UL 444
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• IEC 61156-5
• EN 50288-11-1SMX1000I APC Smart-UPS X 1000VA Rack/Tower LCD 230V
2,500.00 AEDAdd to cartAPC SMX1000I
UPS X 1000VA Rack/Tower LCD 230V
Output
Output Power Capacity 800 Watts / 1000 VA
Max Configurable Power (Watts) 800 Watts / 1000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Output Frequency (sync to mains) Line Interactive
Waveform Type Sine wave
Output Connections (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery Backup)
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14Cord Length 1.83 meters
Input voltage range for main
operations
160 – 286 V
Input voltage adjustable range for
mains operation
151 – 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery APCRBC116
RBC Quantity 1
RBC Quantity 60 ASMX3000RMHV2UNC APC Smart-UPS X 3000VA
8,500.00 AEDAdd to cartAPC SMX3000RMHV2UNC
Smart-UPS X 3000VA
Output
Output Power Capacity 2700 Watts / 3000 VA
Max Configurable Power (Watts) 2700 Watts / 3000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Other Output Voltages 208, 220, 240V
Other Output Voltages Line Interactive
Waveform Type Sine wave
Output Connections (1) IEC 320 C19 (Battery Backup) , (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery
Backup)Input
Nominal Input Voltage 208V
230VInput Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections British BS1363A , IEC-320 C20 , Schuko CEE 7/EU1-16P
Cord Length 2.44 meters
Input voltage range for main
operations
140 – 280 V
Other Input Voltages 220 , 240
Transfer Time 2-4 ms
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery APCRBC117
RBC Quantity 1SNH-C6417BN SAMSUNG 1080P, Wi-Fi Single Band, IR-10M, 2-Way Audio, Micro SD
623.00 AEDAdd to cartSAMSUNG SNH-C6417BN
1080P, Wi-Fi Single Band, IR-10M, 2-Way Audio, Micro SD
DESCRIPTION
- Small and simple design
- 1080p Full HD streaming and recording
- High capacity of storage (Max 128GB)
- 130° Ultra-Wide View Angle
- Wide Dynamic Range
- Improved Night Vision
- Lens Distortion Correction
SR 2340.700 RITTAL Pivoting Frame, Large, Without Trim Panel for TS, SE, 600 mm and 1200 mm Wide Enclosures
1,319.76 AEDAdd to cartRITTAL SR 2340.700
Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures
Product description
Description: To mount 482.6 mm (19″) equipment.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
or TS punched sections with mounting flange, 17 x 73 mm are required
Supply includes: Cam with double-bit lock insert
Parts for attaching to the installation kitSRT10KRMXLI APC Smart-UPS SRT 10000VA RM 230V
23,629.00 AEDAdd to cartAPC SRT10KRMXLI
SMART-UPS SRT 10000VA RM 230V
DESCRIPTION
High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Rack Mounting
brackets, Rack mounting hardware, Rack Mounting support rails, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management CardSRT10KXLI APC Smart-UPS SRT 10000VA 230V
22,851.00 AEDAdd to cartAPC SRT10KXLI
Smart-UPS SRT 10000VA 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management CardBattery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leak-proof
Typical recharge time 1.5hour(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)SRT3000RMXLI APC Smart-UPS SRT 3000VA RM 230V
10,169.00 AEDAdd to cartAPC SRT3000RMXLI
Smart-UPS SRT 3000VA RM 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severitySRTRK4 APC Smart-UPS SRT 19″ Rail Kit for SRT 2.2/3kVA
630.00 AEDAdd to cartAPC SRTRK4
Smart-UPS SRT 19″ Rail Kit for SRT 2.2/3kVA
DESCRIPTION
Model Name APC Smart-UPS SRT 19″ Rail Kit for SRT 2.2/3kVA
Includes Installation guide , Mounting Hardware , Rack Mounting brackets
Standard Lead Time Usually in StockSURT1000XLI APC Smart-UPS RT 1000VA 230V
3,173.00 AEDAdd to cartAPC SURT1000XLI
Smart-UPS RT 1000VA 230V
DESCRIPTION
Output power capacity 700Watts / 1.0kVA
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages 220, 240
Load Crest Factor 3 : 1Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 5 Hz (auto sensing)SURT48XLBP APC Smart-UPS RT 48V Battery Pack for Smart-UPS RT 1/2KVA
2,259.00 AEDAdd to cartAPC SURT48XLBP
Smart-UPS RT 48V Battery Pack for Smart-UPS RT 1/2KVA
DESCRIPTION
Output Voltage Distortion Less than 3%
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1Maximum Width 432MM, 43.2CM
Maximum Depth 483MM, 48.3CM
Rack Height 2USZ 4140.010 RITTAL Cabinet Compact Light
635.40 AEDAdd to cartRITTAL SZ 4140.010
Cabinet Compact Light
Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yesSZ 4315.710 RITTAL Cabinet SZ Door-Operated Switch, with Connection Wire for Compact Light, L: 600 mm, Yellow
145.69 AEDAdd to cartRITTAL SZ 4315.710
Product description
Version: With connection cable
Product features
Dimensions: Length: 600 mm (24 “)
Rated operating
voltage:400 V
Installation options: for compact lights
For rated current
(max.):240 V AC, 2,5 A
Equipment
(electrical):
Cable color: Yellow
Rated insulation
voltage:400 V AC
Rated impulse
withstand voltage,
phase to phase:6000 V AC
Packaging unit: 1 pc(s).
Weight/packaging
unit:0.12 kg (0.3 lb.)
Copper weight (kg
per piece):0T70-2206 HES Distribution Box Int 100pr 301A Empty 160x210x121
103.00 AEDAdd to cartHES T70-2206
Distribution Box Int 100pr 301A Empty 160x210x121
FUSION TELECOM CONNECTION BOX
Available in 20, 50, 100 pair NB:
T70-2204 – 20 Pair Connection Box is
supplied with 2 x 10 pair disconnection
modules. T70-0035, T70-2205 and
T70-2206, all require disconnection
strips (T70-2203).
340TE 7888.892 RITTAL Cabinet 42U Width: 800 mm Height: 2000 mm Depth: 1000 mm
4,001.05 AEDAdd to cartRITTAL TE 7888.892
Product description
Benefits: No frame structure
Optimum accessibility
Readily dismantled and therefore easily installed
Material: Sheet steel
Surface finish: Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour: RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Self-supporting 482.6 mm (19″) mounting frames, front and rear, depth-variable
Sheet steel door vented (vented surface area > 67%), front with designer handle, 130° hinge,
security lock 3524 E
Sheet steel door vented (vented surface area > 67%), rear with 130° hinge, security lock 3524E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including concealed cut-out for cable entry and optional fan
4 levelling feet, M10 (supplied loose)
4 spacers, 20 mm (supplied loose) to raise the roof plate 4 Baying kit
Basic material: Sheet steel
Product features
Dimensions: Width: 800 mm
Height: 2000mm Depth: 1000 mmInstallation height for components:42 U
Distance between
levels as delivered:745 mm
Load capacity: 7000 N
Packs of: 1 pc(s).
Weight/pack: 81 kg
