Data & Server Cabinets
PDU-10402 BELDEN PDU Basic-NS 230V/13A UK (8)UK
290.00 AEDAdd to cartBELDEN PDU-10402
PDU Basic-NS 230V/13A UK (8)UK
DESCRIPTION
PDU, Basic, Standard, 13A, 230V, Horizontal, (8) BS1363, 3 m power cord with BS1363.
Input voltage: 230V
Rated Current*: 13 A
Input frequency: 50/60 Hz
VA per Input (Load Capacity): 2.9kWS8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
5,880.00 AEDAdd to cartPANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbsSR 2340.700 RITTAL Pivoting Frame, Large, Without Trim Panel for TS, SE, 600 mm and 1200 mm Wide Enclosures
1,319.76 AEDAdd to cartRITTAL SR 2340.700
Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures
Product description
Description: To mount 482.6 mm (19″) equipment.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
or TS punched sections with mounting flange, 17 x 73 mm are required
Supply includes: Cam with double-bit lock insert
Parts for attaching to the installation kitSZ 4140.010 RITTAL Cabinet Compact Light
635.40 AEDAdd to cartRITTAL SZ 4140.010
Cabinet Compact Light
Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yesSZ 4315.710 RITTAL Cabinet SZ Door-Operated Switch, with Connection Wire for Compact Light, L: 600 mm, Yellow
145.69 AEDAdd to cartRITTAL SZ 4315.710
Product description
Version: With connection cable
Product features
Dimensions: Length: 600 mm (24 “)
Rated operating
voltage:400 V
Installation options: for compact lights
For rated current
(max.):240 V AC, 2,5 A
Equipment
(electrical):
Cable color: Yellow
Rated insulation
voltage:400 V AC
Rated impulse
withstand voltage,
phase to phase:6000 V AC
Packaging unit: 1 pc(s).
Weight/packaging
unit:0.12 kg (0.3 lb.)
Copper weight (kg
per piece):0TE 7888.892 RITTAL Cabinet 42U Width: 800 mm Height: 2000 mm Depth: 1000 mm
4,001.05 AEDAdd to cartRITTAL TE 7888.892
Product description
Benefits: No frame structure
Optimum accessibility
Readily dismantled and therefore easily installed
Material: Sheet steel
Surface finish: Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour: RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Self-supporting 482.6 mm (19″) mounting frames, front and rear, depth-variable
Sheet steel door vented (vented surface area > 67%), front with designer handle, 130° hinge,
security lock 3524 E
Sheet steel door vented (vented surface area > 67%), rear with 130° hinge, security lock 3524E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including concealed cut-out for cable entry and optional fan
4 levelling feet, M10 (supplied loose)
4 spacers, 20 mm (supplied loose) to raise the roof plate 4 Baying kit
Basic material: Sheet steel
Product features
Dimensions: Width: 800 mm
Height: 2000mm Depth: 1000 mmInstallation height for components:42 U
Distance between
levels as delivered:745 mm
Load capacity: 7000 N
Packs of: 1 pc(s).
Weight/pack: 81 kgTL-CAC-PDU06 TECHLOGIKS- 06 Way UK Type 13amp 220volt PDU with 1.8mtr Cable without Switch,
98.00 AEDAdd to cartTECHLOGIKS TL-CAC-PDU06
06 Way UK Type 13amp 220volt PDU with 1.8mtr Cable without Switch
DESCRIPTION
• Power supply: 85-265VAC.
• 6 Way, 10 Way, 12 Way
• 13 Amps, 16 Amps, 32 Amps
• Industrial PDU’s are also available.TL-FS42810 TECHLOGIKS- 42U 800(W)x1000(D) Free Stand Cabinet with Front Single Glass Door with Lock
3,220.00 AEDAdd to cartTECHLOGIKS TL-FS42810
42U 800(W)x1000(D) Free Stand Cabinet with Front Single Glass Door with Lock
DESCRIPTION
Techlogiks Free Standing Cabinets has an available height ranging from 12U to 47U with a width of 600mm,
800mm and depth of 600mm, 800mm and 1000mm. It is a rugged type, large loading and has a maximum static loading of 800 kg. The rack is completely providing an accessories such as an adjustable feet, removable side panels, heavy duty castors, several lock cable entry from top and bottom panel with adjustable sizes, an
optional plinth which enables the rack to stand in a fixed position, and 4 way fans.
• Good compatibility, adapt to more servers. Perfect ventilation
• Vented front door and rear door enable ventilation and reliable operation
• The top and bottom wiring channel can be closed and adjusted.
• Optional plinth to meet under base wiring, ventilation and rat-proof
• Rack’s side panel can be easily assembled.TS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
134.41 AEDAdd to cartRITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)TS 8611.070 RITTAL Comfort Handle
160.77 AEDAdd to cartRITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).TS 8611.080 RITTAL Handle Adapter For Comfort Handle
58.00 AEDAdd to cartRITTAL TS 8611.080
Handle Adapter For Comfort Handle
Product features
Packaging unit: 1 pc(s).
Weight/packaging
unit:
0.08 kg (0.2 lb.)
EAN: 4028177211933Product description
(long):
TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035
