Description
DESCRIPTION
OPTRONICS OPT-00-4-01
LC OM4 Fibre Pigtail 1mtr Tight Buffered 900um Aqua
OPTRONICS OPT-00-4-01
7.50 AED
OPTRONICS OPT-00-4-01
LC OM4 Fibre Pigtail 1mtr Tight Buffered 900um Aqua
Available on backorder
Related products
- Fiber Optic Armored Outdoor Cable, OPTRONICS, Single Loose Tube Steel Tape Armoured Cable With Steel Wires
OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
9,000.00 AEDAdd to cartOPTRONICS OFC-LSTW-31-06
Single Loose Tube Steel Tape Armoured Cable With Steel Wires.
Single Loose Tube Metallic Arwoured Cable With Steel Wire Stength Members.
The Gel Filled Single Loose Tube Consists of 2 to 12 250ur Singlemode (G.652.D)
or Multimode (OM1/OM2/OM3/OM4) Fibers And it is Protected by a Water Swellable Tape.
There Is an Option for Low Smoke Zero Halogen (LSZH) or Polyethelene (PE) Jacket.
N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
21.00 AEDAdd to cartN123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroBundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
Reviews
There are no reviews yet.