Subtotal: 22,473.71 AED
875.00 AED
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
Available on backorder
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
| Dimensions | 44.45 × 30.8 × 4.39 cm |
|---|
11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)
Norden 341-1OS2S315 SCAPC Pigtail OS2 PVC 1.5m
MECHANICAL DATA
COMPLIANCE
ISO/IEC 11801
EN50173 -1,ANSI TIA/EIA 568B
FIBRE PIGTAIL
Fibre pigtails are used in permanent connections between patch
panels and incoming cables / single blown fibres. Pigtails are preconstructed
with connectors. Connector options include small form
factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are
based on 900μm tight buffered cores (600μm MT-RJ) and suitable for
internal use only inside suitable Fibre Management Systems
www.nordencommunication.com
Fibre System
Crush (N) 800
Impact (Nm) 0.2
Operating Temperature -10°C to +70°C
Installation temperature 0°C to +70°C
Temp – Installation 0°C to +70°C
Bend Radius 50mm (min)
Fibre Type Max. Attenuation
(dB/km)
850nm 1300nm 1310nm 1550nm
OM1 62.5/125μm ≤2.7 ≤0.6 – –
OM2 50/125μm ≤2.5 ≤0.7 – –
OM3 50/125μm ≤2.3 ≤0.6 – –
OM4 50/125μm ≤2.3 ≤0.6 – –
OS1 9/125μm – – ≤0.34 ≤0.20
OS2 9/125μm – – ≤0.34 ≤0.24
Min. Overfill Launch
Bandwidth
(Mhz•km)
Min. Gigabit Ethernet Link
Distance (m)
Gigabit 10Gigabit
850nm 1300nm 850nm 1300nm 850nm
≥200 ≥600 275 550 –
≥500 ≥500 550 550 –
≥1500 ≥500 1000 600 300
≥3500 ≥500 1000 600 550
– – – – –
– – – – –
OPTICAL PERFORMANCE DATA (CONNECTOR)
ORDERING INFORMATION
ORDERING GUIDE
www.nordencommunication.com
Fibre System
FIBRE PIGTAIL
Description Part Number
Singlemode OS2
SC/APC 1m PVC SC/APC OS2 PVC 1M PIGTAIL 341-1OS2S310
SC/APC 1.5m PVC SC/APC OS2 PVC 1.5M PIGTAIL 341-1OS2S315
SC/APC 2m PVC SC/APC OS2 PVC 2M PIGTAIL 341-1OS2S320
SC/APC 3m PVC SC/APC OS2 PVC 3M PIGTAIL 341-1OS2S330
SC/APC 1m LSZH SC/APC OS2 LSZH 1M PIGTAIL 342-1OS2S310
SC/APC 1.5m LSZH SC/APC OS2 LSZH 1.5M PIGTAIL 342-1OS2S315
SC/APC 2m LSZH SC/APC OS2 LSZH 2M PIGTAIL 342-1OS2S320
SC/APC 3m LSZH SC/APC OS2 LSZH 3M PIGTAIL 342-1OS2S330
Pigtail characteristics
· Fibre assembly to terminate cable with fusion splicing
· Suitable for use in patch panels using splice cassettes.
· The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
The LANmarkOF
OM3 pigtails have LANmarkOF
OM3 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.2b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM4 pigtails have LANmarkOF
OM4 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.3b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM5 pigtails have LANmarkOF
OM5 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.4b. The pigtail jacket is Lime Green.
·
The LANmarkOF
SM pigtails have LANmarkOF
SM GIGAliteFLEX fibre
inside. These fibres are bend insensitive and compliant to ITUT
G.657.A1 and to
IEC 60793250,
fibre model B6.a1. The pigtail jacket of the singlemode pigtails is
yellow.
Reviews
There are no reviews yet.