Description
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
49.00 AED
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
Available on backorder
Related products
760201129 | 360-iP-1100-E-GS6-2U-48 COMMSCOPE Cat6A U/UTP Patch Panel, 48 Port
4,648.46 AEDAdd to cartCOMMSCOPE 760201129 | 360-iP-1100-E-GS6-2U-48
SYSTIMAX 360™ iPatch® 1100GS6 Evolve U/UTP Patch Panel, 48 Port
General Specifications
ANSI/TIA Category 6A
Cable Type Unshielded
Color Silver
Intelligence Type iPatch® enabled
Rack Units 2
Total Ports, quantity 48
Wiring T568A | T568B
Dimensions
Height 89.66 mm | 3.53 in
Width 482.6 mm | 19 in
Depth 206.5 mm | 8.13 in
Compatible Diameter Over Dielectric, maximum 1.168 mm | 0.046 in
Electrical Specifications
Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz
Insulation Resistance, minimum 500 MOhmNCB-C6UGRYR1-05 D-Link Cat6 UTP 24AWG Patch Cord, 0.5M
7.00 AEDAdd to cartD-Link NCB-C6UGRYR1-05
D-Link Cat6 UTP 24AWG Patch Cord, 0.5M
SPECIFICATIONS
• 4 Pairs Unshielded Twisted Pair (UTP) Cable
• Conductor Metal: Bare Copper
• Color Code: Gray
• Conductor: 24 AWG
• Insulation Material: HD-PE
• Jacket Material: PVC UL94V-0
• Heat-resistant: 60oC minimum (Temperature limited)MODULAR CONNECTOR/PLUG
• RJ-45 8P for Transparence color.
• Gold plated: 30U”
• Contact blade: Phosphor Bronze
• Temperature range: -10 ~ 80oC
• Dielectric withstanding voltage: 500V AC
• Insulation resistance: 35M Ohm (max.)
• Durability: 750 matching cycles
• Cable-to-plug tensile strength: 20lbs (89N) (min.)
• UL applications: 250V AC, 2A (max.)
• Polycarbonate (PC) UL94-V-0653508 DATWYLER RJ45 1M Patch Cords Cat.6A
29.00 AEDAdd to cartDATWYLER 653508
RJ45 patch cords Cat.6A (IEC) 500 MHz
Description
Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an
overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection.
The cable CU 7702 flex 4P (Cat.7) offers excellent Next and impedance values due to the individually
foil screened pairs (PiMF).
Due to the overall copper braid, the patch cables have an excellent screen performance and are
highly flexible. They are optimized for the transmission of CATV signals up to 862 MHz.
The pach cords meet all the requirements of Category 6A (IEC) and the limit values stipulated for
Class EA cabling links (Channels) for 10GBase-T applications.
Standard assortment: from 0.5 m up to 20 m.
Customised adjustments (anti-snag boot, termination, label) are available at short notice.
Reviews
There are no reviews yet.