Description
Cisco WS-C2960+48PST-S
Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite
WS-C2960+48PST-S Cisco Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite
3,977.00 AED
Cisco WS-C2960+48PST-S
Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite
Available on backorder
Related products
WS-X4248-RJ45V Cisco Switch 48 ports
840.00 AEDAdd to cartCisco WS-X4248-RJ45V
● 48 ports
● 10/100 (RJ-45)
● Cisco IOS Software Release 12.2(18)EW or later
● IEEE 802.3af PoE and Cisco prestandard
● Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
WS-C2960+24TC-S Cisco Switch TC-S 24 Port
1,540.00 AEDAdd to cartCisco Product Code WS-C2960+24TC-S
Enclosure Type 1 RU
Feature Set LAN Lite
Uplink Interfaces 2 (SFP or 1000BASE-T)
Ports 24 x 10/100 Ethernet Interfaces
Forwarding Bandwidth 16 Gbps
DRAM 128 MB
Flash Memory 64 MB
Dimensions 4.4 x 45.0 x 24.2 cm
Package Weight 7.73 KgSpecification
Configurations
10/100 Ethernet Interfaces – 24
Uplink Interfaces – 2 (SFP or 1000BASE-T)
Cisco IOS Software Feature Set – LAN LiteVWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
2,940.00 AEDAdd to cartCisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1 Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
Reviews
There are no reviews yet.