Subtotal: 1,920.14 AED
26.00 AED
TECHLOGIKS TL-PNC6UT24
24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
DESCRIPTION
Entire steel 24 ports UTP blank patch panel. UTP Cat.6 keystone jacks can be assembled on this panel.
The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.
Fitting for horizontal distribution in the equipment’s room and equipment’s connecting.
Available on backorder
TECHLOGIKS TL-PNC6UT24
24 Ports 01U 19Inch Unloaded Patch Panel with Rear Cable Management
DESCRIPTION
Entire steel 24 ports UTP blank patch panel. UTP Cat.6 keystone jacks can be assembled on this panel.
The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.
Fitting for horizontal distribution in the equipment’s room and equipment’s connecting.
DATWYLER 653508
RJ45 patch cords Cat.6A (IEC) 500 MHz
Description
Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an
overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection.
The cable CU 7702 flex 4P (Cat.7) offers excellent Next and impedance values due to the individually
foil screened pairs (PiMF).
Due to the overall copper braid, the patch cables have an excellent screen performance and are
highly flexible. They are optimized for the transmission of CATV signals up to 862 MHz.
The pach cords meet all the requirements of Category 6A (IEC) and the limit values stipulated for
Class EA cabling links (Channels) for 10GBase-T applications.
Standard assortment: from 0.5 m up to 20 m.
Customised adjustments (anti-snag boot, termination, label) are available at short notice.
DATWYLER 418070
RJ45 Module KU-T 1/8 Tool-less, Cat. 6, Unshielded
DESCRIPTION
For the transmission of digital and analogue voice, video and data signals.
Suitable for all Class D applications respectively Class E Channels in accordance with ISO/IEC 11801, EN 50173-1 and TIA/EIA 568-B.2-10. Housing made of high-impact resistant,
flame retardant compound, UL94V-0 rated, with Keystone mounting clip.
Contact spring with phosphor bronze alloy, plated with gold.
IDC made of phosphor bronze alloy. Information:
Suitable for the same faceplates and surface mount boxes as Datwyler’s shielded Keystone modules (KS-T).
MECHANICAL PROPERTIES
Solid copper wire 0.40 mm (AWG 26) to 0.65 mm (AWG 22)
Re-connection for AWG 22, AWG 23 and AWG 24
when using the same or bigger wire diameter
Stranded copper wire AWG 26 (with 7 bare stranded wires), re-usable once
Diameter over insulation 0.70 mm to 1.40 mm (1.60 mm)
Temperature range storing: – 40° C to + 70° C
during installation: – 10° C to + 60° C
in operation: – 20° C to + 60° C
NEXANS
· For DIN-Rail mount (35mm)
· Data connection for the industry
· For up to 6 copper of fibre optic Snap-In connectors (not included)
· Splice trays as accessories
· For technical enclosures, Wireless Access Points, Industrial cabinets
· Snap-In connectors not included
· Robust metal body, powder coated
· IP20 protection rating with individual dust shutters
Possibility of Individual port colour coding through coloured shutter
· up to 6 LANmark RJ45 or GG45 Snap-In jacks
· up to 6 SC Snap-In couplers (6 fibres)
· up to 3 SC duplex Snap-In couplers (6 fibres)
· up to 6 LC duplex Snap-In couplers (12 fibres)
·
· Mix of copper jacks and optic adapters possible
· Strain release through cable gland or tie wraps
· Removable (screws) side cover
Type of cables
· Shielded Industrial Category 6 and 7 data cables, AWG 24 to AWG23
· Fiber optic cables up to 15mm diameter
· Simplex – Duplex and breakout fibre optic cables
· Tight buffer or loose tube fibre optic cables
· Pre-terminated cables
Reviews
There are no reviews yet.