Description
DESCRIPTION
OPTRONICS OPT-00-4-01
LC OM4 Fibre Pigtail 1mtr Tight Buffered 900um Aqua
OPTRONICS OPT-00-4-01
7.50 AED
OPTRONICS OPT-00-4-01
LC OM4 Fibre Pigtail 1mtr Tight Buffered 900um Aqua
Available on backorder
Related products
TL-FPT-LC-09-1.5 TECHLOGIKS- 09/125 OS2 LC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5mtr
13.50 AEDAdd to cartTECHLOGIKS TL-FPT-LC-09-1.5
09/125 OS2 LC/UPC T/Buff fiber 900um Single Mode Pigtail 1.5 mtr
DESCRIPTION
Techlogiks Single Mode fiber pigtails are available in a variety of colours to complement any network, custom
configurations and performances. Full choice of available connector types like LC/SC/ST/FC/E2000/MTRJ etc..100% optically tested in factory
Tight or semi-tight buffered 900um cable available
Visual inspection of endface by 400x microscope.
Low insertion loss and back reflectionN121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
20.30 AEDAdd to cartN121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
Reviews
There are no reviews yet.