Subtotal: 5,654.28 AED
600.00 AED
D-link NCB-6AUGRYR-305
Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
DESCRIPTION
•Enhanced performance cable for transmission of high
speed data, digital and analogue voice and video (RGB)
signals on LANs
•Supports Gigabit Ethernet (10GbaseT) standard
•Operates at a bandwidth of 500MHz
Conductor : 23 AWG Solid bare Copper
Insulation : High Density Polyethylene
Pairs : 2 Insulated conductors twisted together
Available on backorder
D-link NCB-6AUGRYR-305
Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
DESCRIPTION
•Enhanced performance cable for transmission of high
speed data, digital and analogue voice and video (RGB)
signals on LANs
•Supports Gigabit Ethernet (10GbaseT) standard
•Operates at a bandwidth of 500MHz
Conductor : 23 AWG Solid bare Copper
Insulation : High Density Polyethylene
Pairs : 2 Insulated conductors twisted together
SCSPPU24UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)
Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0
SCSPPU48UTP Opterna
DESCRIPTION
Opterna snap-in type UTP keystone patch panel are designed for customized connectors. Based on the installers specific design requirements, connector can be snapped into the panel. The UTP keystone patch panels are compatible for use with the category 5e and 6 keystone jacks and come as an unloaded panel. The patch panel is constructed of high quality plastic and metal back plate to provide the maximum strength and durability. The UTP keystone patch panel has an integrated rear cable management feature for cable routing and strain relief requirements. The rear cable management easily mounts at the back of the panel. The patch panel has an integrated label identification slot which allows the installer to design labels based on the project requirement making the panel TIA 606 compliant.
Applications
• Standard 19” rack compatible
• Suitable for UTP keystone jacks
• Height: 1U (24 ports), 2U (48 ports)
Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class D/E
• CENELEC EN 50173-1:2011
• UL 94 V-0
127-31101WH Norden
DESCRIPTION
Norden Category 6 UTP patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (solid UTP cable,patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx)applications support. This is fully backward compatible to Category 5e (Class D) products.Each patch cord is tested with Fluke tester and individual cover includewith the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Reviews
There are no reviews yet.