Subtotal: 4,474.41 AED
600.00 AED
D-link NCB-6AUGRYR-305
Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
DESCRIPTION
•Enhanced performance cable for transmission of high
speed data, digital and analogue voice and video (RGB)
signals on LANs
•Supports Gigabit Ethernet (10GbaseT) standard
•Operates at a bandwidth of 500MHz
Conductor : 23 AWG Solid bare Copper
Insulation : High Density Polyethylene
Pairs : 2 Insulated conductors twisted together
Available on backorder
D-link NCB-6AUGRYR-305
Cat6A 10G UTP 23AWG PVC Solid Cable – 305m/Roll – Grey Colour
DESCRIPTION
•Enhanced performance cable for transmission of high
speed data, digital and analogue voice and video (RGB)
signals on LANs
•Supports Gigabit Ethernet (10GbaseT) standard
•Operates at a bandwidth of 500MHz
Conductor : 23 AWG Solid bare Copper
Insulation : High Density Polyethylene
Pairs : 2 Insulated conductors twisted together
SCSPCC6UTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cord conforms to ANSI/TIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6/Class E applications. The products have been tested up to 250MHz and are designed for high speed protocols such as Gigabit Ethernet (1000Mbps) applications. The Patch cords are constructed of a U/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Applications
• Cross connect, Patch Panel and Work Area
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4
127-31102GY Norden
DESCRIPTION
Norden Category 6 UTP patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (solid UTP cable,patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx)applications support. This is fully backward compatible to Category 5e (Class D) products.Each patch cord is tested with Fluke tester and individual cover includewith the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
127-31101WH Norden
DESCRIPTION
Norden Category 6 UTP patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (solid UTP cable,patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx)applications support. This is fully backward compatible to Category 5e (Class D) products.Each patch cord is tested with Fluke tester and individual cover includewith the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Reviews
There are no reviews yet.