Description
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
49.00 AED
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
Available on backorder
Related products
760201129 | 360-iP-1100-E-GS6-2U-48 COMMSCOPE Cat6A U/UTP Patch Panel, 48 Port
4,648.46 AEDAdd to cartCOMMSCOPE 760201129 | 360-iP-1100-E-GS6-2U-48
SYSTIMAX 360™ iPatch® 1100GS6 Evolve U/UTP Patch Panel, 48 Port
General Specifications
ANSI/TIA Category 6A
Cable Type Unshielded
Color Silver
Intelligence Type iPatch® enabled
Rack Units 2
Total Ports, quantity 48
Wiring T568A | T568B
Dimensions
Height 89.66 mm | 3.53 in
Width 482.6 mm | 19 in
Depth 206.5 mm | 8.13 in
Compatible Diameter Over Dielectric, maximum 1.168 mm | 0.046 in
Electrical Specifications
Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz
Insulation Resistance, minimum 500 MOhmTL-PNC6-UT24M Techlogiks 24 Ports 01U 19Inch Fully Loaded Patch Panel with Rear Cable Management
285.00 AEDAdd to cartTechlogiks
Category 6 Unshielded Patch Panel
Techlogiks Cat 6 modular patch panel utilizes quad frame modules offered with 8-contact inserts wired to Insulation Displacement Connectors (IDC}. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards.
Applications
- 10008ASE-T, 100BASE-Tx, 10BASE-T, 155M ATM, 4/16MB Token
- 100Mbps TP-PMD, /SON, ADSL, Analog & Digital Voice {VoIP)/
- Power over Ethernet (PoE}, Control Signal.
Standards
- Lead-free & RoHS2
- ANSl/TIA-568-C.2, ANSl/TIA- 1096-A {FCC Part 68}, /SO/IEC 11801 2nd edition and CENELEC EN 50173-1.
- Level A reliability requirements of /EC 60603-7-2 and /EC 60603-7-4 for
- Compatible for T568A and T5688 wiring
418070 DATWYLER RJ45 Module KU-T 1/8 Tool-less, Cat. 6, Unshielded
12.00 AEDAdd to cartDATWYLER 418070
RJ45 Module KU-T 1/8 Tool-less, Cat. 6, Unshielded
DESCRIPTION
For the transmission of digital and analogue voice, video and data signals.
Suitable for all Class D applications respectively Class E Channels in accordance with ISO/IEC 11801, EN 50173-1 and TIA/EIA 568-B.2-10. Housing made of high-impact resistant,
flame retardant compound, UL94V-0 rated, with Keystone mounting clip.
Contact spring with phosphor bronze alloy, plated with gold.
IDC made of phosphor bronze alloy. Information:
Suitable for the same faceplates and surface mount boxes as Datwyler’s shielded Keystone modules (KS-T).
MECHANICAL PROPERTIES
Solid copper wire 0.40 mm (AWG 26) to 0.65 mm (AWG 22)
Re-connection for AWG 22, AWG 23 and AWG 24
when using the same or bigger wire diameter
Stranded copper wire AWG 26 (with 7 bare stranded wires), re-usable once
Diameter over insulation 0.70 mm to 1.40 mm (1.60 mm)
Temperature range storing: – 40° C to + 70° C
during installation: – 10° C to + 60° C
in operation: – 20° C to + 60° C
Reviews
There are no reviews yet.