Subtotal: 33,640.79 AED
930.00 AED
APC AP9565
Rack PDU, Basic, 1U, 16A, 208/230V, (12)C13
DESCRIPTION
Nominal Output Voltage 208V, 230V
Maximum Total Current Draw 16
Output Connections (12) IEC 320 C13 (Battery Backup)
Cord Length 8.2ft (2.5meters)
Number of Power Cords 1
Available on backorder
APC AP9565
Rack PDU, Basic, 1U, 16A, 208/230V, (12)C13
DESCRIPTION
Nominal Output Voltage 208V, 230V
Maximum Total Current Draw 16
Output Connections (12) IEC 320 C13 (Battery Backup)
Cord Length 8.2ft (2.5meters)
Number of Power Cords 1
Load Capacity 3680VA
Maximum Input Current 16A
APC SRT3000RMXLI
Smart-UPS SRT 3000VA RM 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
APC SMX1000I
UPS X 1000VA Rack/Tower LCD 230V
Output
Output Power Capacity 800 Watts / 1000 VA
Max Configurable Power (Watts) 800 Watts / 1000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Output Frequency (sync to mains) Line Interactive
Waveform Type Sine wave
Output Connections (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery Backup)
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Cord Length 1.83 meters
Input voltage range for main
operations
160 – 286 V
Input voltage adjustable range for
mains operation
151 – 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery APCRBC116
RBC Quantity 1
RBC Quantity 60 A
RITTAL 4155110
Technical
Description Compact fluorescent tube 18 W with high luminosity.
Benefits Simple, fast assembly
Installation options TS horizontal section of the roof frame: direct
TS, SE vertical section: with TS adaptor bracket
SE sections at the front and rear of the roof frame: with TS adaptor bracket
SE extrusions at the side of the roof frame: direct
AE, CM, TP: with universal bracket
AE: with rail for interior installation
Material Plastic
Supply includes Universal light
Integral motion detector
Light
Light cover
Assembly parts
Dimensions Width: 345 mm
Height: 95 mm
Depth: 55 mm
Rated operating voltage 110 V – 240 V, 1~, 50 Hz/60 Hz
Equipment (electrical) Ballast: Wide-range electronic ballast
Light: Compact fluorescent lamp, base 2G11
Jack/socket (type): D, earthing-pin (type F, CEE 7/3)
Integral motion detector: yes
Switch (type): Integral, on/off/motion detector mode
Operating temperature Operation (environment): -15°C…+45°C
Bearing: -20°C…+70°C
Power consumption 18 W
Rated insulation voltage 250 V AC
Rated impulse withstand voltage, phase
to phase
2500 V AC
Protection category I (PE conductor)
Light – installation type Screw-fastening
Connection options Power supply via connectors
Through-wiring (creating rows of lights)
Light cover yes
Reviews
There are no reviews yet.