-
GT-39LC001MR12 BELDEN FIBER PIGTAIL, LC, OM3 50/125UM, 1 MTR (12 Pcs pack)
BELDEN GT-39LC001MR12
FIBER PIGTAIL, LC, OM3 50/125UM, 1 MTR (12 Pcs pack)
General Description:
FX FIELD-TERMINATION PIGTAIL, OM3, LC SIMPLEX, TIGHT BUFFER 900 UM, SINGLE-ENDED, 2M,
AQUA BUFFER$ 89.57 -
FT3LC900PS01 BELDEN LC SIMPLEX PIGTAIL OM3 LC 50 Micron 2M
BELDEN FT3LC900PS01 Cable Assemblies – FX FIELD-TERMINATION PIGTAIL
General Description:
FX FIELD-TERMINATION PIGTAIL, OM3, LC SIMPLEX, TIGHT BUFFER 900 UM, SINGLE-ENDED, 2M,
AQUA BUFFERMaterials
Materials:
Description Type Material Color
Connector end 1 LC Plastic Aqua
Boot end 1 Rubber Aqua
Ferrule end 1 2.5mm Zirconia-Ceramic White
Jacket 900 um Tight Buffer OFN Aqua$ 85.76 -
000201R4Z31001M CORNING FO-Pigtail OS2 Connectors: LCUPC- Length: 1M
CORNING 000201R4Z31001M
FO-Pigtail OS2 Connectors: LCUPC- Length: 1M
DESCRIPTION
C00-POLAND
Pigtails are used for non -permanent connections in patch panels, transmission equipment etc. Factory assembled
pigtails allow for high quality termination of a network.Flame Rating LSZH™/FRNC
Cable Assembly Type Single Fiber
Fiber Category Single-mode (OS2)$ 9.53 -
FBWSCUC11-JXF003 COMMSCOPE Singlemode SC-UC .9MM Pigtail
COMMSCOPE FBWSCUC11-JXF003
Singlemode SC-UC .9MM Pigtail
DESCRIPTION
Color, boot A Blue
Color, connector A Blue
Construction Type Pigtail, jacketed
Interface, Connector A SC/UPC
Jacket Color Yellow
Total Fibers, quantity 1$ 6.81 -
FBWLCUC11-JXF003 COMMSCOPE Singlemode LC-UC .9MM Pigtail
COMMSCOPE FBWLCUC11-JXF003
Singlemode LC-UC .9MM Pigtail
DESCRIPTION
Color, boot A Blue
Color, connector A Blue
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Jacket Color Yellow
Total Fibers, quantity 1$ 6.81 -
341-1OS2S315 Norden SC APC Pigtail OS2 PVC 1.5m
Norden 341-1OS2S315 SCAPC Pigtail OS2 PVC 1.5m
MECHANICAL DATA
COMPLIANCE
ISO/IEC 11801
EN50173 -1,ANSI TIA/EIA 568B
FIBRE PIGTAIL
Fibre pigtails are used in permanent connections between patch
panels and incoming cables / single blown fibres. Pigtails are preconstructed
with connectors. Connector options include small form
factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are
based on 900μm tight buffered cores (600μm MT-RJ) and suitable for
internal use only inside suitable Fibre Management Systems
www.nordencommunication.com
Fibre System
Crush (N) 800
Impact (Nm) 0.2
Operating Temperature -10°C to +70°C
Installation temperature 0°C to +70°C
Temp – Installation 0°C to +70°C
Bend Radius 50mm (min)
Fibre Type Max. Attenuation
(dB/km)
850nm 1300nm 1310nm 1550nm
OM1 62.5/125μm ≤2.7 ≤0.6 – –
OM2 50/125μm ≤2.5 ≤0.7 – –
OM3 50/125μm ≤2.3 ≤0.6 – –
OM4 50/125μm ≤2.3 ≤0.6 – –
OS1 9/125μm – – ≤0.34 ≤0.20
OS2 9/125μm – – ≤0.34 ≤0.24
Min. Overfill Launch
Bandwidth
(Mhz•km)
Min. Gigabit Ethernet Link
Distance (m)
Gigabit 10Gigabit
850nm 1300nm 850nm 1300nm 850nm
≥200 ≥600 275 550 –
≥500 ≥500 550 550 –
≥1500 ≥500 1000 600 300
≥3500 ≥500 1000 600 550
– – – – –
– – – – –
OPTICAL PERFORMANCE DATA (CONNECTOR)
ORDERING INFORMATION
ORDERING GUIDE
www.nordencommunication.com
Fibre System
FIBRE PIGTAIL
Description Part Number
Singlemode OS2
SC/APC 1m PVC SC/APC OS2 PVC 1M PIGTAIL 341-1OS2S310
SC/APC 1.5m PVC SC/APC OS2 PVC 1.5M PIGTAIL 341-1OS2S315
SC/APC 2m PVC SC/APC OS2 PVC 2M PIGTAIL 341-1OS2S320
SC/APC 3m PVC SC/APC OS2 PVC 3M PIGTAIL 341-1OS2S330
SC/APC 1m LSZH SC/APC OS2 LSZH 1M PIGTAIL 342-1OS2S310
SC/APC 1.5m LSZH SC/APC OS2 LSZH 1.5M PIGTAIL 342-1OS2S315
SC/APC 2m LSZH SC/APC OS2 LSZH 2M PIGTAIL 342-1OS2S320
SC/APC 3m LSZH SC/APC OS2 LSZH 3M PIGTAIL 342-1OS2S330$ 6.81 -
FBXLCUC11-MXF003 COMMSCOPE MULTIMODE LC-UC .9MM PIGTAIL
COMMSCOPE FBXLCUC11-MXF003
MULTIMODE LC-UC .9MM PIGTAIL
General Specifications
Color, connector A Beige
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Total Fibers, quantity 1$ 6.26 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
NKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
$ 5.99 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
Panduit NKFP91BN1NNM001
LC SM OS2 Pigtails
DESCRIPTION
Fiber Size: Pigtails: 900μm tight-buffered fiber
Patch Cords: 1.6mm or 3.0mm duplex jacketed zip cord cable
Cable Jacket Ratings: Riser (OFNR): Per UL 1666 and c(UL) FT-4
Low Smoke Zero
Halogen (LSZH): Per IEC 60332-1, IEC 60754-2, IEC 61034
Connector Types: LC, SC, and ST$ 5.72 -
N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroBundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.72 -
N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.53 -
N121.4MLY Nexans Pigtail LC/UPC Singlemode 9/125 1m Yellow
Pigtail characteristics
· Fibre assembly to terminate cable with fusion splicing
· Suitable for use in patch panels using splice cassettes.
· The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
The LANmarkOF
OM3 pigtails have LANmarkOF
OM3 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.2b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM4 pigtails have LANmarkOF
OM4 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.3b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM5 pigtails have LANmarkOF
OM5 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.4b. The pigtail jacket is Lime Green.
·
The LANmarkOF
SM pigtails have LANmarkOF
SM GIGAliteFLEX fibre
inside. These fibres are bend insensitive and compliant to ITUT
G.657.A1 and to
IEC 60793250,
fibre model B6.a1. The pigtail jacket of the singlemode pigtails is
yellow.$ 5.45
