-
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.70 -
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.76 -
N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
N205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
$ 8.20 -
N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroBundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.72 -
N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.53 -
N205.627 Nexans LANmark_OF_Duplex_LC_Snap_In_Adaptor_Singlemode
N205.627 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 10.13 -
N890.092 Nexans LANmark-OF Splice Cassette Cover
N890.092 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques.
The cassette protects the fusion splices and holds them in position. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmark-OF patch panels (N439.*) and LANsense-OF sliding preloaded patch panels (N883.2B*). These splice cassettes are fixed to each other at the back of the cassettes with the provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.$ 3.68 -
N890.090 Nexans LANmark-OF Splice Cassette Heat Shrink Protectors
N890.090 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques. The cassette protects the fusion splices and holds them in position. The splice cassettes with heatshrink protectors can be used for both 250 and 900 µm coated fibres. Hence these cassettes are compatible with LANmarkOF Tight Buffer, Loose Tube and MicroBundle cables. Splicing with heat shrink protectors can also be used for both LANmark OF Maxistrip and Tight Buffer Pigtails. The cassettes have 12 splice positions. When using LANmarkOF Maxistrip Pigtails 2 protectors can be stacked on top of each other increasing capacity to 24 splices per cassette. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmarkOF patch panels (N439.*) and LANsense OF sliding preloaded patch panels (N883.2B*). The splice cassettes are fixed to each other at the back of the cassettes with the
provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.
The cassette facilitates 2 rings of routing: an inner ring for the fibres of the pigtails and an outer ring for the fibres of the cable.$ 12.44 -
N121.5MLA Nexans LANmark-OF Pigtail LC OM3 Maxistrip LSZH 50/125 1m Aqua
N121.5MLA Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF OM3 pigtails have LANmarkOF OM3 GIGAliteFLEX fibre inside. This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793210, fibre model A1a.2b. The pigtail jacket is Aqua.Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.36 -
N205.617 Nexans LANmark-OF Snap-In Adaptor
N205.617 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 5.85$ 6.53N205.617 Nexans LANmark-OF Snap-In Adaptor
$ 5.85$ 6.53 -
N439.4SNB Nexans LANmark-OF Sliding Patch Panels
N439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.$ 78.96$ 83.04N439.4SNB Nexans LANmark-OF Sliding Patch Panels
$ 78.96$ 83.04 -
N205.624 Nexans Adapter DSC-DSC Single mode
Nexans N205.624
LANmark-OF Snap-in Adapter DSC-DSC Single mode
Description
LANmark-OF snap-in adapters have been designed for snapping into the
modular OF patch panels and ZD boxes. They are available in single SC,
dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector
types offer double density, as two fiber connections are offered on the SCtype
footprint. Installation time is saved as the snap-in concept replaces
the time-consuming screwing attachment of coupling devices.
Materials
· Adapter Housing: PBT, 15% Glass
· Sleeve Holder: PBT, 20% Glass
· Dust Cap: PP
· Spring:SUS 304 CSP 3/4 H
· PB Sleeve: PB – inner diameter 2,48mm – length 11.4mm
· Zirconia Sleeve: ZA Ceramic – inner diam.: 2.48mm -length11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)$ 8.17
