-
FFXLCLC42-MXF010 COMMSCOPE Multimode LC-LC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXLCLC42-MXF010Â
Multimode LC-LC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B LC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2$ 28.86 -
FFXLCLC42-MXF010 COMMSCOPE MULTIMODE LC-LC 1.6MM DUPLEX
COMMSCOPE FFXLCLC42-MXF010Â
MULTIMODE LC-LC 1.6MM DUPLEX
DESCRIPTION
Jacket Color Aqua
Total Fibers, quantity 2Cord Length, maximum 999 ft | 999 m
Cord Length, minimum 1 ft | 1 m
Ordering Note For lengths greater than 999 ft (304 m), orders must be in meters | Minimum length
may vary based on cable configurationConstruction Type Duplex patch cord
Interface, connector A LC
Interface Feature, connector A Standard
Interface, connector B LC$ 26.95 -
FFXLCSC42 COMMSCOPE OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex
COMMSCOPE
OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex, Low Smoke Zero Halogen (LSZH)
General Specifications
Color, boot A Aqua
Color, boot B Aqua
Color, connector A Beige
Color, connector B Beige
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B SC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2
Dimensions
Cable Assembly Length, minimum (ft) 2
Cable Assembly Length, maximum (ft) 325
Cable Assembly Length, minimum (m) 1
Cable Assembly Length, maximum (m) 99
Diameter Over Jacket 1.6 mm | 0.063 in$ 29.13 -
FFXSCSC42-MXF010 COMMSCOPE Multimode SC-SC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXSCSC42-MXF010Â
Multimode SC-SC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, connector A SC
Interface Feature, connector A Standard
Interface, connector B SC
Interface Feature, connector B Standard$ 28.86 -
FSC24 PANDUIT Panduit Splice Chip 24port fusion splices w/level
FSC24 PANDUIT
DESCRPTION
Accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit® Opticom® Enclosure.
$ 7.62 -
FSC24 Panduit Splice Chip 24port Fusion Splices W/Level
 Panduit FSC24
Splice Chip 24port Fusion Splices W/Level
DESCRIPTION
Fiber splice chip accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit Opticom Enclosure.
$ 7.62 -
GLC-LH-SMD= Cisco 1000BASE-LX/LH SFP Transceiver Module, MMF/SMF, 1310nm, DOM
 Cisco GLC-LH-SMD=Â
1000BASE-LX/LH SFP Transceiver Module, MMF/SMF, 1310nm, DOM
DESCRIPTION
The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
$ 209.64 -
GLC-SX-MMD Cisco 1000BASE-SX SFP Transceiver Module, MMF, 850nm, DOM
Cisco GLC-SX-MMDÂ
1000BASE-SX SFP Transceiver Module, MMF, 850nm, DOM
DESCRIPTION
Type Multimode
* 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic,
complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively$ 111.63 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.23 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.23 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
NKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
$ 5.99 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
 Panduit NKFP91BN1NNM001
LC SM OS2 Pigtails
DESCRIPTION
Fiber Size: Pigtails: 900μm tight-buffered fiber
Patch Cords: 1.6mm or 3.0mm duplex jacketed zip cord cable
Cable Jacket Ratings: Riser (OFNR): Per UL 1666 and c(UL) FT-4
Low Smoke Zero
Halogen (LSZH): Per IEC 60332-1, IEC 60754-2, IEC 61034
Connector Types: LC, SC, and ST$ 5.72
