-
N439.4SNB Nexans LANmark-OF Sliding Patch Panels
N439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.$ 78.96$ 83.04N439.4SNB Nexans LANmark-OF Sliding Patch Panels
$ 78.96$ 83.04 -
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04 -
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.70 -
N890.090 Nexans LANmark-OF Splice Cassette Heat Shrink Protectors
N890.090 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques. The cassette protects the fusion splices and holds them in position. The splice cassettes with heatshrink protectors can be used for both 250 and 900 µm coated fibres. Hence these cassettes are compatible with LANmarkOF Tight Buffer, Loose Tube and MicroBundle cables. Splicing with heat shrink protectors can also be used for both LANmark OF Maxistrip and Tight Buffer Pigtails. The cassettes have 12 splice positions. When using LANmarkOF Maxistrip Pigtails 2 protectors can be stacked on top of each other increasing capacity to 24 splices per cassette. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmarkOF patch panels (N439.*) and LANsense OF sliding preloaded patch panels (N883.2B*). The splice cassettes are fixed to each other at the back of the cassettes with the
provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.
The cassette facilitates 2 rings of routing: an inner ring for the fibres of the pigtails and an outer ring for the fibres of the cable.$ 12.44 -
N890.092 Nexans LANmark-OF Splice Cassette Cover
N890.092 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques.
The cassette protects the fusion splices and holds them in position. The Nexans fibre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmark-OF patch panels (N439.*) and LANsense-OF sliding preloaded patch panels (N883.2B*). These splice cassettes are fixed to each other at the back of the cassettes with the provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.$ 3.68 -
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.76 -
SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.36 -
SCSAFPUK2WH Opterna Angular Faceplate 86 x 86 mm for 2 Keystone Jack, U.K Standard
SCSAFPUK2WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
STANDARDS
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.63 -
SCSFPUK1WH Opterna Faceplate 86 x 86 mm for 1 Keystone Jack, U.K. Standard
SCSFPUK1WH Opterna
DESCRIPTION
Opterna faceplates are manufactured of highly stable fire retardant and high density plastics which ensure product durability. It comes with a combination of 1, 2, 3 and 4 ports for your application and to satisfy your customer’s needs. Opterna faceplates are available in two series; the elegant series of Opterna faceplates comes with a peripheral frame providing an elegant appearance where in the screw holes are concealed by the peripheral frame. Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection. The angled design of faceplate maintains the patch cords bend radius and provides extra room behind the back box for storage of cable. The angled faceplate is highly recommended for Category 6 and 6A shielded installations. Other variants of the faceplate series are the floor box adaptors available in straight and angled.
$ 1.23 -
SCSJAC6AUTPBK Opterna 180° Cat 6A Unshielded Keystone jack with T568A/B label, Black
SCSJAC6AUTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance.
The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief.
The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 5.72 -
SCSJAC6UTPBK Opterna 180° Cat 6 Unshielded Keystone jack with T568A/B label, Black
SCSJAC6UTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance. The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief. The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Applications
• Horizontal Distribution and Backbone Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 2.99 -
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81
