-
ACTRJ1UCMPC Schneider Cable Manager Deep Assy
Schneider ACTRJ1UCMPC
Cable Manager Deep Assy
DESCRIPTION
Product 19” patchcord guiding panel
Colour Dark grey
Complementary
Rack unit 1U
Width 482 mm
Height 43 mm
Depth 100 mm$ 13.07 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.23 -
FFXLCLC42-MXF010 COMMSCOPE MULTIMODE LC-LC 1.6MM DUPLEX
COMMSCOPE FFXLCLC42-MXF010
MULTIMODE LC-LC 1.6MM DUPLEX
DESCRIPTION
Jacket Color Aqua
Total Fibers, quantity 2Cord Length, maximum 999 ft | 999 m
Cord Length, minimum 1 ft | 1 m
Ordering Note For lengths greater than 999 ft (304 m), orders must be in meters | Minimum length
may vary based on cable configurationConstruction Type Duplex patch cord
Interface, connector A LC
Interface Feature, connector A Standard
Interface, connector B LC$ 26.95 -
FBXLCUC11-MXF003 COMMSCOPE MULTIMODE LC-UC .9MM PIGTAIL
COMMSCOPE FBXLCUC11-MXF003
MULTIMODE LC-UC .9MM PIGTAIL
General Specifications
Color, connector A Beige
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Total Fibers, quantity 1$ 6.26 -
760242975 COMMSCOPE InstaPATCH® 360, LazrSPEED® SYSTIMAX 360 Distribution Panel 12 LC Aqua iPatch Ready
COMMSCOPE 760242975
InstaPATCH® 360, LazrSPEED® SYSTIMAX 360 Distribution Panel 12 LC Aqua iPatch Ready
General Specifications
Adapter Color Aqua
Application Used in conjunction with G2 1U, 2U and 4U MOD panel shelves, surface mount and raised floor enclosures
Body Style Ganged
Interface LC
Interface Feature Standard
Shuttered No
Total Ports, quantity 12
Fiber Mode Multimode$ 53.91 -
760193771 COMMSCOPE G2 1U Sliding Modular Cassette Panel
COMMSCOPE 760193771
G2 1U Sliding Modular Cassette Panel
General Specifications
Application Accepts four G2 modular cassettes | Accepts one InstaPATCH® 360 data module or 360DP
panel | Accepts two RoloSplices with three trays each
Rack Units 1
Shelf Movement Sliding
Dimensions
Height 44.45 mm | 1.75 in
Width 482.6 mm | 19 in
Depth 457.2 mm | 18 in$ 231.42 -
760031674 COMMSCOPE LazrSPEED® Indoor/Outdoor Low Smoke Zero Halogen Riser Distribution Cable, 8 Fiber Single-unit
COMMSCOPE 760031674 (1000 mtr)
LazrSPEED® Indoor/Outdoor Low Smoke Zero Halogen Riser Distribution Cable, 8 Fiber Single-unit
General Specifications
Cable Type Distribution
Construction Type Non-armored
Fiber Type, quantity 8
Jacket Color Black
Total Fiber Count 8
Dimensions
Diameter Over Jacket 6.3 mm | 0.248 inProduct Type Fiber indoor/outdoor cable
$ 1,633.59 -
760038240 COMMSCOPE 1U Patchcord Management
COMMSCOPE 760038240
1U Patchcord Management
General Specifications
Color Black
Rack Units 1
Dimensions
Height 43.942 mm | 1.73 in
Width 482.6 mm | 19 in
Depth 81.28 mm | 3.2 inIncluded Four M6 cage nuts | Four M6 x 12 mm mounting screws | One patchcord manager
Packaging quantity 1$ 17.70 -
N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
N205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
$ 8.20 -
N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroBundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.72 -
N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes.
• The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkOF SM pigtails have LANmarkOF SM GIGAliteFLEX fibre inside. These fibres are bend insensitive and compliant to ITUT G.657.A1 and to IEC 60793250, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) with Aluminium protectors (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um fibres. When using tight buffer cables (900 um fibres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is fixed on the 250 um coating after stripping the 900 um coating. Fixing the pigtail on the 900 um coating will lead to improper alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area before insertion in the splice tool.
$ 5.53 -
N205.627 Nexans LANmark_OF_Duplex_LC_Snap_In_Adaptor_Singlemode
N205.627 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 10.13