-
CCH-01U CORNING Closet Conn Housing, 1U (F/2 Panels)
CORNING CCH-01U
Closet Conn Housing, 1U (F/2 Panels)
DESCRIPTION
COO-MEXICO
Designed based on thousands of hours of customer
feedback, Corning Cable Systems Closet Connector
Housings (CCHs) offer more than two dozen innovative
features that make installation and troubleshooting of
fibre optic connectivity faster, easier and more cost effective.$ 239.59 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.23 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.23 -
760193771 COMMSCOPE G2 1U Sliding Modular Cassette Panel
COMMSCOPE 760193771
G2 1U Sliding Modular Cassette Panel
General Specifications
Application Accepts four G2 modular cassettes | Accepts one InstaPATCH® 360 data module or 360DP
panel | Accepts two RoloSplices with three trays each
Rack Units 1
Shelf Movement Sliding
Dimensions
Height 44.45 mm | 1.75 in
Width 482.6 mm | 19 in
Depth 457.2 mm | 18 in$ 231.42 -
EDAV2422 BELDEN Vertical Cable Manager – 42U
BELDEN EDAV2422
Vertical Cable Manager – 42U
DESCRIPTION
Vertical Cable Management Double finger strip for E-Series. Material: Metal and plastic moulded fingers on two sides
Suitable Applications: Cable manager for 800mm wide Free Standing E-Serie Cabinets
Environmental Space: IndoorWidth: 60 mm
Depth: 135 mm$ 230.06 -
CCH-CP24-A9 CORNING 24-fiber CCH panel with twelveDuplex LC singlemode adapters with ceramic inserts
CORNING CCH-CP24-A9
24-fiber CCH panel with twelve Duplex LC single-mode adapters with ceramic inserts
DESCRIPTION
COO-POLAND
Corning Cable Systems Closet Connector Housing Panels (CCH-CP) are offered in a variety of fiber counts for use with LANscape® Solutions hardware products for a “one-size-fits-all” approach.
$ 209.64 -
NN01408.SM12 BELDEN LC 24 Port Patch Pannel Half Loaded
BELDEN NN01408.SM12
1U FiberExpress@EASE 12 Duplex LC (24 fiber) SM Termination/Splice
Patch Panel – Half loadedConstruction
Weight: 2.500 kg
Height: 44 mm
Width: 482 mm
Depth: 251.5 mm$ 200.11 -
FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.59 -
FDBDCSX048 Opterna Indoor Wallmount fiber Distribution Box 48 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.59 -
CCHE-CP24-04 CORNING CCHE-CP 12 LC Duplex SM
CORNING CCHE-CP24-04
CCHE-CP 12 LC Duplex SM
DESCRIPTION
COO-POLAND
The panels are used with field-installable connectors or
in applications where the pre-connectorised cables are
routed directly from the equipment to the piece of interconnect hardware. This provides an efficient way to securely mate two or more connectors.Adapter Type LC duplex
Fibre Count 24
Number of Adapters 12MOQ of 10 pcs are applicable
$ 186.50 -
NN01408.3M12 BELDEN 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded
NN01408.3M12 BELDEN
12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded Product
Description
1U FiberExpress@EASE 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loadedWeight: 2.500 kg
Height: 44 mm
Width: 482 mm
Depth: 251.5 mmFront Connection: Flush
Footprint/Type: LC$ 184.87 -
TL-FDB-W24-SC-SX Techlogiks Wall Mount Fiber Distribution Box
Techlogiks TL-FDB-W24-SC-SX
Wall Mount Fiber Distribution Box
Applications:
- Telecommunication Networks
- Local Area Networks
- FTTH
- CATV Networks
- Active Device Termination
Features & Benefits:
- Low excess loss & high
- Retractable Splicing Tray
- Convenience and ease of handling
- Indoor Use, Outdoor use customable
Distribution Shelf :-
Shelves are designed with enough capacity for fiber splices and it is suitable for 12 to 72 fiber splices. It is made from fabricated mildvsteel not less than 1.2mm thick or equivalent and painted in good condition. The Fiber Distribution Frame shall be of corrsion resistance and robust construction and shall allow both top or bottom entry for access to this splice trays
$ 176.97
