-
ASA5525-FPWR-K9 Cisco 5525-X with FirePOWER Services, 8GE, AC, 3DES/AES, SSD
Cisco ASA5525-FPWR-K9
5525-X with FirePOWER Services, 8GE, AC, 3DES/AES, SSD
● Site-to-site and remote access VPN and advanced clustering provide highly secure, high-performance access and high availability to help ensure business continuity.
● Granular Application Visibility and Control (AVC) supports more than 4,000 application-layer and risk-based controls that can launch tailored intrusion prevention system (IPS) threat detection policies to optimize security effectiveness.$ 5,760.84 -
ASA5525-SSD120-K9 Cisco NGFW-Xw/SW8GEData1GEMgmtAC3DES/AES,SSD120G
Cisco ASA5525-SSD120-K9
NGFW-Xw/SW8GEData1GEMgmtAC3DES/AES,SSD120GProduct Code ASA5525-SSD-K9
DESCRIPTION
Bundle Integrated with 120G SSD
Interfaces
8 copper GE ports,
1 copper GE management port,
1 expansion slot
Stateful inspection throughput (maximum) 2 Gbps
3DES/AES VPN throughput 300 Mbps
IPsec VPN peers 750
Virtual interfaces (VLANs) 200
Memory 8 GB$ 4,700.92 -
WS-C4506-E Cisco Cat4500 E-Series 6-Slot Chassis, Fan, no ps
Cisco WS-C4506-E
Cat4500 E-Series 6-Slot Chassis, Fan, no ps
DESCRIPTION
● Integrated wireless controllers in Cisco® Catalyst® switches simplify network architecture and operations.
● Cisco Catalyst solutions – including Cisco Catalyst Instant Access Solution and Smart Operations – save time by automating provisioning and deployment, while simplifying network operations.
● The Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) and Cisco Prime™ Infrastructure give you simplified solutions for management.$ 3,535.63 -
AIR-XLTC50DA31 Cisco Bridge
Cisco AIR-XLTC50DA31 Bridge
Brand Cisco Type of device Bridge Data link layer IEEE 802.1q Total data transfer rate (theoretical) 160 Mbit/s Frequency band 5GHz $ 2,820.66AIR-XLTC50DA31 Cisco Bridge
$ 2,820.66 -
WS-C2960X-48TS-L Cisco Catalyst 2960-X 48 GigE, 4 x 1G SFP, LAN Base
Cisco WS-C2960X-48TS-L
DESCRIPTION
Catalyst 2960-X 48 GigE, 4 x 1G SFP, LAN BaseProduct Code WS-C2960X-48TS-L
Enclosure Type Rack-mountable – 1U
Feature Set LAN Base
Uplink Interfaces 4 x 1G SFP
Ports 48 x Ethernet 10/100/1000 Gigabit ports
Maximum stacking number 8
Stack bandwidth 80G
Forwarding Bandwidth 108Gbps
Switching Bandwidth 216Gbps
RAM 512MB
Flash Memory 128MB
Dimensions 44.5 cm x 27.9 cm x 4.5 cm$ 2,378.77 -
WS-C2960X-24PD-L Cisco Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base
Cisco WS-C2960X-24PD-L
Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base
$ 1,823.90 -
C9200L-24P-4G-E Cisco Catalyst 9200L 24-port PoE+, 4 x 1G, Network Essentials
Cisco C9200L-24P-4G-E
Catalyst 9200L 24-port PoE+, 4 x 1G, Network Essentials
DESCRIPTION
Brand Name Cisco
Item model number C9200L-24P-4G-E
Item Weight 17.4 pounds Product Dimensions 23.5 x 18.9 x 7.5 inches
Item Dimensions L x W x H23.5 x 18.9 x 7.5 inches
$ 1,477.03 -
WS-C2960+24LC-S Cisco Switch LC-S 24 Port
Cisco Switch WS-C2960+24LC-S
Specifications
Type Fixed Topology Ethernet (10/100BaseTX)
Ethernet (10/100/1000BaseT)
Gigabit Ethernet (SFP)Maximum Port density 8 10/100 PoE ports, 16 10/100 ports Uplinks 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Modular/Expansion Slots n/a Architecture Layer 2 Switching (basic connectivity), Voice Enabled Form Factor Fixed, Rack Mountable, Standalone/Clustering Dimensions 1.73 x 17.5 x 13 in. DRAM 64 MB $ 1,421.76WS-C2960+24LC-S Cisco Switch LC-S 24 Port
$ 1,421.76 -
WS-C2960X-24PS-L Cisco Catalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN Base
Cisco WS-C2960X-24PS-LCatalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN BaseDESCRIPTIONmodel info: WS-2960X-24PS-L
enclosure type Rack-mountable – 1U
Ports 24 x 10/100/1000 + 4 x 1G SFP
Network management Interface 10/100 Mbps Ethernet (RJ-45)
Available PoE Power 370W
Forwarding bandwidth(Gbps) 108Gbps
Maximum stacking number 8
Stack Bandwidth 80G
Forwarding Performance 71.4Mpps
Switching bandwidth 216Gbps
Maximum active VLANs 1023
MAC Address Table Size 16K (default)
CPU APM86392 600MHz dual core
RAM 512 MB
Flash Memory 128 MB$ 1,406.52 -
WS-C2960+48PST-S Cisco Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite
Cisco WS-C2960+48PST-S
Catalyst 2960 Plus 48 10/100 PoE + 2 1000BT +2 SFP LAN Lite
$ 1,082.80 -
3560CX-12PC-S Cisco Switch 12 Ports Managed Rack Mountable
Cisco 3560CX-12PC-S
Cisco Switch 12 Ports Managed Rack Mountable
GENERAL
-
Enclosure TypeDesktop, rack-mountable, DIN rail mountable, wall-mountable 1U
-
SubtypeGigabit Ethernet
-
Ports12 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP
-
Power Over Ethernet (PoE)PoE+
-
PoE Budget240 Watt
-
Jumbo Frame Support9018 bytes
-
Authentication MethodKerberos, RADIUS, Secure Shell (SSH), TACACS+
-
RAM512 MB
-
Authentication MethodKerberos, Secure Shell (SSH), RADIUS, TACACS+
-
Power Over Ethernet (PoE)PoE+
-
Status IndicatorsPort status, port transmission speed, port duplex mode, system, link/activity
-
Routing ProtocolRIP-1, RIP-2, static IP routing
-
Jumbo Frame Support9018 bytes
-
PoE Budget240 W
-
ManufacturerCisco
$ 1,067.28 -
-
VWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
Cisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1 Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
$ 800.46