-
TS 8611.070 RITTAL Comfort Handle
RITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).$ 43.77 -
2500500 RITTAL Connection Cable
RITTAL 2500500
Connection Cable
Product Description
Version Infeed 3-pole (with socket without connector)
Description For simple time-saving connection of the LED system light.
Color Orange
Standards Mains connection cables: AVLV2
Mains connector: ECBT2
Dimensions 3000 mm (118 “)
Rated operating voltage 100V – 240V 1~ 50Hz/60Hz
Cross-section AWG 16
Packaging unit 1 pc(s).
Weight/packaging unit 0.35 kg (0.8 lb.)$ 41.382500500 RITTAL Connection Cable
$ 41.38 -
TS- 8601.600 RITTAL Base/Plinth Components, Front and Rear, 100 mm Sheet Steel
RITTAL TS- 8601.600
Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly partsDimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kg$ 41.13 -
7825361 RITTAL Cabinet DK Gland Plate Modules For ENC Braithwell Way,
RITTAL 7825361
DK GLAND PLATE MODULES FOR ENC
Description
For simple, sealed cable entry.
Note Several gland module plates need to be combined to close off the base completely in the
TS-IT
Material Sheet steel
Surface finish Zinc-plated
To fit TS
TS IT
SE
Width: 600 mm
Dimensions Depth: 237.5 mm
Packs of 1 pc(s).
Weight/pack 1.29 kg$ 40.30 -
DK 7159.035 RITTAL Cable Management Panel
RITTAL DK 7159.035
Product description
Description:
For horizontal management of the patch cables, with 5 cable shunting rings.
Note:
The sizes given are external dimensions.
Cable shunting rings supplied loose
Packs of:1 pc(s).Dimensions:
Width: 482.6 mm / 19″
Height: 1 U
Ring dimensions:
Height: 44 mm
Depth: 70 mm$ 40.30 -
SZ 4315.710 RITTAL Cabinet SZ Door-Operated Switch, with Connection Wire for Compact Light, L: 600 mm, Yellow
RITTAL SZ 4315.710
Product description
Version: With connection cable
Product features
Dimensions: Length: 600 mm (24 “)
Rated operating
voltage:400 V
Installation options: for compact lights
For rated current
(max.):240 V AC, 2,5 A
Equipment
(electrical):
Cable color: Yellow
Rated insulation
voltage:400 V AC
Rated impulse
withstand voltage,
phase to phase:6000 V AC
Packaging unit: 1 pc(s).
Weight/packaging
unit:0.12 kg (0.3 lb.)
Copper weight (kg
per piece):0$ 39.67 -
3174100 RITTAL Spare Filter Mat
RITTAL 3174100
Spare Filter Mat
Product Description
Material Chemical fibers
Dimensions Height: 95 mm (3.7 “)
Width: 264 mm (10 “)Packaging unit 12 pc(s).
Depth: 17 mm (0.67 “)
Version for roof fans$ 38.123174100 RITTAL Spare Filter Mat
$ 38.12 -
8620034 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
RITTAL 8620034
Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
Description:
To finish off a base/plinth unit at the sides and for additional stabilisation or for the
interior configuration of bayed base/plinths. One 200 mm high or two 100 mm high trim
panels may optionally be fitted on 200 mm high base/plinths.Depth: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 2.5 kg$ 38.12 -
TS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
RITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)$ 36.60 -
3239200 RITTAL Outlet Filter Standard
RITTAL 3239200
Outlet Filter Standard
Description
For ventilation by convection, an outlet filter can be installed in the upper and lower sections
of the enclosure.Dimensions Width: 204 mm
Height: 204 mm
Depth: 24 mm
Required mounting cut-out Width: 177 mm
Height: 177 mm$ 34.03 -
3239.200 RITTAL Cabinet Climate Control Accessories
RITTAL 3239.200
Cabinet Climate Control Accessories
Outlet filter
For ventilation by convection, an outlet filter can
be installed in the upper and lower sections of the
enclosure.
Material:
ABS, material resistance to UL 94-V0
Color:
RAL 7035
Configuration:
− Outlet filter
− Filter mat
Accessories:
− Spare filter mats, see page 483
− Fine filter mats, see page 484
Dimensions
H x W x D inches (mm)
Part No.
Standard EMC
5 x 5 x .6 (116.5 x 116.5 x 16) 3237.200 3237.060
6 x 6 x .9 (148.5 x 148.5 x 24) 3238.200 3238.060
8 x 8 x .9 (204 x 204 x 24) 3239.200 3239.060
10 x 10 x .9 (255 x 255 x 25) 3240.200 3240.060
13 x 13 x .9 (323 x 323 x 25) 3243.200 3243.060$ 30.49 -
4597000 RITTAL PS4597 MOUNTING BRACKET (PK 4)
RITTAL 4597000
PS4597 MOUNTING BRACKET (PK 4)
Description
May be screw-fastened onto all enclosures and mounting parts with system punchings on a
25 mm pitch pattern.
Material Sheet steel
Surface finish Zinc-plated
Supply includes Assembly screws
Packs of 4 pc(s).
Weight/pack 0.34 kg$ 28.59