-
AIR-AP3802I-E-K9 Cisco 802.11ac W2 AP w/CA; 4×43; Mod; Int Ant;mGig E Domain
Cisco AIR-AP3802I-E-K9
802.11ac W2 AP w/CA; 4×43; Mod; Int Ant;mGig E Domain
DESCRIPTION
Antennas :Internal Antennas
Interfaces :
2 Ethernet ports
100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
CAT 5e cabling
Higher-quality 10GBASE-T (CAT 6/6a) cabling
100/1000BASE-T autosensing (RJ-45 – AUX port)
Management console port (RJ-45)
System : 1024 MB DRAM
256 MB flash
$ 1,074.08 -
AIR-CAP3702E-E-K9 Cisco 802.11ac Ctrlr AP 4×4:3SS w/CleanAir; Ext Ant; B Reg Domain
Cisco AIR-CAP3702E-E-K9
802.11ac Ctrlr AP 4×4:3SS w/CleanAir; Ext Ant; B Reg Domain
DESCRIPTION
WiFi Standards: 802.11a/b/g/n/ac
Ideal For: Midsize or large enterprises that require mission-critical traffic
Max Data Rate 5GHz : 1.3 Gbps
MIMO Radio Design: Spatial Streams :4 x 4:3
Client count/Client Link client count :200/128
$ 980.15 -
AIR-ANT2547V-N Cisco 2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Antenna, N Connector
Cisco AIR-ANT2547V-N
2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Antenna, N Connector
DESCRIPTION
Product Type : Antenna
Antenna Placing / Mounting: Outdoor
Frequency Range:2.4 GHz, 5 GHz
Gain:7 dBi (for 5 GHz), 4 dBi (for 2.4 GHz)
Directivity: Omni-directional
$ 276.89 -
CAFCU09OS2TBL015YL Opterna OS2 FC/UPC T/Buff fiber 900um Pigtail 1.5mtr
CAFCU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.
$ 4.49 -
CASTU09OS2TBL015YL Opterna OS2 ST/UPC T/Buff fiber 900um Pigtail 1.5mtr
CASTU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.
$ 4.36 -
CALCU09OS2TBL015YL Opterna OS2 LC/UPC T/Buff fiber 900um Pigtail 1.5mtr
CALCU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.
$ 4.36 -
CASCU09OS2TBL015YL Opterna OS2 SC/UPC T/Buff fiber 900um Pigtail 1.5mtr
CASCU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.$ 3.81 -
FPSLSCSX0241B Opterna 19″ Unloaded 1U Sliding Patchpanel 24 SC Simplex (LC Duplex) Port- Black
FPSLSCSX0241B Opterna
DESCRIPTION
The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U and 4U height increments.
The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The panel supports 24 way, 48 way and 96 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cut-outs on the back for use with pre-terminated MTP/MPO trunks.
$ 57.18 -
SCSPCC6AUTP05MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 5mtr Grey
SCSPCC6AUTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 13.34 -
SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
SCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 7.90 -
SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81 -
SCSAFPUK2WH Opterna Angular Faceplate 86 x 86 mm for 2 Keystone Jack, U.K Standard
SCSAFPUK2WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
STANDARDS
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.63