-
TE 7888.892 RITTAL Cabinet 42U Width: 800 mm Height: 2000 mm Depth: 1000 mm
RITTAL TE 7888.892
Product description
Benefits: No frame structure
Optimum accessibility
Readily dismantled and therefore easily installed
Material: Sheet steel
Surface finish: Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour: RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Self-supporting 482.6 mm (19″) mounting frames, front and rear, depth-variable
Sheet steel door vented (vented surface area > 67%), front with designer handle, 130° hinge,
security lock 3524 E
Sheet steel door vented (vented surface area > 67%), rear with 130° hinge, security lock 3524E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including concealed cut-out for cable entry and optional fan
4 levelling feet, M10 (supplied loose)
4 spacers, 20 mm (supplied loose) to raise the roof plate 4 Baying kit
Basic material: Sheet steel
Product features
Dimensions: Width: 800 mm
Height: 2000mm Depth: 1000 mmInstallation height for components:42 U
Distance between
levels as delivered:745 mm
Load capacity: 7000 N
Packs of: 1 pc(s).
Weight/pack: 81 kg$ 1,089.34 -
TS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
RITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)$ 36.60 -
TS 8611.070 RITTAL Comfort Handle
RITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).$ 43.77 -
TS 8611.080 RITTAL Handle Adapter For Comfort Handle
RITTAL TS 8611.080
Handle Adapter For Comfort Handle
Product features
Packaging unit: 1 pc(s).
Weight/packaging
unit:
0.08 kg (0.2 lb.)
EAN: 4028177211933Product description
(long):
TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035$ 15.79 -
TS 8611.180 RITTAL Lock Insert For Handle Systems
RITTAL TS 8611.180
Lock Insert For Handle Systems
Product description
Supply includes: with 2 keys
Product features
Installation in handle
system:
Comfort handle for lock inserts
Mini-comfort handle for lock inserts
Lock Insert: Security lock insert no. 3524 E
Packaging unit: 1 pc(s).
Weight/packaging unit: 0.04 kg (0.1 lb.)
Product description (long):
TS Lock insert for handle systems, lock-insert locking Nr. 3524 E$ 16.34 -
TS 8612.080 RITTAL Cabinet Chassis 17 x 73 mm
RITTAL TS 8612.080
Cabinet Chassis 17 x 73 mm
Product description
Version: For the inner mounting level and for mounting on doors
Description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply
position in the TS holes and secure.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: The rail for interior installation is required when installing in CM, TP
Supply includes: Assembly screws
Product features
Suitable for: Width/depth: 800 mm
Dimensions: Length: 790 mm (31 ˝)
Installation options: On the vertical TS enclosure profile: on the outer mounting level, all-round, height-offset
For SE, may additionally be mounted on the top horizontal section in the depth
In the tubular door frame for TS, SE and PC
In CM and TP via rails for interior installation: in width, for inner mounting level
Simply locate installation kit into component shelves and secure. One pack is sufficient for 2
component shelves. 100 kg surface load, static
Suitable for door
width:900 mmPackaging unit: 4 pc(s).
Weight/packaging
unit:
3.58 kg (7.9 lb.)Product description
(long):
TS TS punched section with mounting flange, 17 x 73 mm, for inner mounting level: for W/D:
800 mm, for door width: 900 mm, L: 790 mm$ 73.94 -
TS- 8601.600 RITTAL Base/Plinth Components, Front and Rear, 100 mm Sheet Steel
RITTAL TS- 8601.600
Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly partsDimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kg$ 41.13 -
VIC3-2FXS/DID Cisco Voice Interface Card Includes Two FXS Ports.
Cisco VIC3-2FXS/DID
Specification
VIC3-2FXS/DID Specification
General
Device Type Voice / fax module
Form Factor Internal
Modem
Connectivity
Technology
Wired
Analog Ports
Qty
2
Expansion / Connectivity
Interfaces 2 x network – FXS/DID – RJ-11
Compatible
Slots
1 x expansion slot
Miscellaneous
Compliant
Standards
FCC Class B certified, UL 1950
Software / System Requirements
OS Required Cisco IOS 12.4(15)XZ$ 304.94 -
VOL-FPUK-2K 3M (2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
3M VOL-FPUK-2K
(2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
DESCRIPTION
A wide range of face plates and boxes are available for the ‘K’
series Jacks which ensure easy fitting and smart presentation of
the RJ45 outlet. Vertical and 30° angled versions are offered in
local country adaptations giving the ability to surface or flush
mount. The Keystone mounting feature of the Jack may allow you to
use VF-45TM or other Keystone boxes or face plates.
Different colour options are available in some versions. A label
holder and white application icon (coloured icons are available) finish
the presentation to give a smart and functional appearance.
The choice of UTP, FTP or STP 360° braid or foil connection offers
you the required electromagnetic compatibility level you require.$ 3.54 -
VOL-FPUK-LJ6C-F2K 3M Faceplates and Adapters LJ6C Style
3M VOL-FPUK-LJ6C-F2K
UK (86 x 86mm) Faceplates and Adapters LJ6C Style
Specification
Technical characteristics
Flat faceplates – size (h x w x d)
Single gang – 86 x 86 x 10mm
Double gang – 86 x 147 x 10mm
Faceplate apertures (h x w)
LJ6C – single gang single slot –38.7 x 25mmSingle gang double LJ6C – 2 slot –38.7 x 25mm
Double gang 4 slot –38.7 x 25mm
Adapters (h x w) 38.7 x 25mm
$ 4.36 -
VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
3M VOL-OCK6-U
Description
• Tool-less jack … easy and quick to install
… fast reliable connection in record time: all 8 copper conductors are effortlessly
wired in a single operation
… quality of connection by design: not dependant on tool condition or operator skills,
just listen for the click
… consistent results: the length of untwisted pairs and the length between the end of the
conductor and the IDC contacts are always kept to a minimum, by design
• Re-usable … if a wiring mistake is made there is no need to use a new jack
… no time wasted waiting for another delivery
• Shallow depth, cable entry from
top or bottom
… easier cable management
… more space and flexibility to ensure the cable minimum bend radius is never compromised
– allows a wide range of cable routing options
– can be used with low profile trunking and boxes
• Keystone mounting … compatibility between Volition copper and fibre jacks and many other accessories on the market
using the standard keystone mounting
• UTP, FTP and STP 360° shielded versions
have the same ‘one-click’ tool-less design
… solutions for all levels of EMC protection using the same accessories means less training
• Accepts both solid conductors from AWG
26 to 22 and stranded conductors
… compatible with all cables on the market and enables ‘jack to plug’ cables to be manufactured
using stranded conductors (for use in open office architectures)
• Integral shutter … increased dust protection, especially during installation or in a dirty environment
… no additional shuttering required on faceplates
… higher port density
… allows direct mounting into floor$ 16.34$ 27.23VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
$ 16.34$ 27.23 -
VOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacks$ 47.65
