-
8612280 RITTAL TS MOUNTING RAIL 18X38MM FOR
RITTAL 8612280
TS MOUNTING RAIL 18X38MM FOR
Description:
Simply locate and secure with a screw. Location system makes installation and removal easy.
Only needs to be secured on one side, but can be secured on both sides if necessary.
Material: Carbon steel
Supply includes: Assembly screwsPackaging unit: 4 pc(s).
Weight/packaging
unit:3.7 kg (8.1 lb.)$ 49.01 -
8620003 RITTAL Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
RITTAL 8620003
Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
Description:
High-load capacity base/plinth corner pieces with moulded self-positioning to the baying
enclosure system, may be used with or without trim panels depending on the
application. Large openings in the corner piece for optimum access to the screwfastening
point, may be concealed with a corner and baying cover.Product features
To fit: Enclosure type: VX
Width: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
© Rittal 2019 1
Weight/pack: 4.84 kg$ 46.28 -
8620034 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
RITTAL 8620034
Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
Description:
To finish off a base/plinth unit at the sides and for additional stabilisation or for the
interior configuration of bayed base/plinths. One 200 mm high or two 100 mm high trim
panels may optionally be fitted on 200 mm high base/plinths.Depth: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 2.5 kg$ 38.12 -
8640003 RITTAL Base/Plinth corner Piece with Base/Plinth Trim Panels, Front and Rear, Optimised Design, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
RITTAL 8640003
Base/Plinth corner Piece with Base/Plinth Trim Panels, Front and Rear, Optimised Design, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
Description
Enables cable entry from below and space-saving cable routing within the base/plinth For cabinet widths / depths: 800 mm Colour: RAL 9005 (black) Optimised design . Includes: 4 base/plinth corner pieces, height 100 mm 4 corner covers 1 baying cover 2 base/plinth trim panels for 800 mm wide/deep racks$ 52.82 -
8821 Cisco Wireless IP Phone
Cisco Wireless IP Phone 8821
Features
● IEEE 802.11a/b/g/n/ac radio for VoWLAN communications support
● The large 2.4-inch (6 cm) color (240 x 320 pixels) display makes viewing easy
● IP54-rated for protection against dust, splash, and water
● MIL-STD-810G standard for shock resistance
● The phone offers exceptional voice quality with High-Definition (HD) voice
● A built-in full-duplex speakerphone offers high-quality hands-free communications
● The phone supports third-party Bluetooth 3.0 headsets and a 3.5-mm headphone jack for added freedom
● The Applications key provides direct access to XML applications such as push-to-talk and Lone Worker
● Battery life delivers up to 11.5 hours of talk time
● Enhanced encryption support for SHA-1 and SHA-2 signatures
● Fast, secure roaming using 802.11r and Cisco Centralized Key Management roaming
● Automatic certificate renewal – SCEP support
Description
● Six line appearances● Abbreviated dialing● Adjustable ringing and volume levels● Adjustable display brightness and timeout● Audible and vibrating ringers● Auto-answer● Auto-detection of headset and auto-answer from headset● Automatic keypad lock● Callback● Call forward● Call history lists● Call park● Call pickup● Call timer● Call waiting● Caller ID● cBarge● Corporate directory● Conference● Direct transfer$ 647.998821 Cisco Wireless IP Phone
$ 647.99 -
8831 Cisco Unified IP Conference Phone
Cisco Unified IP Conference Phone 8831
Features and Benefits
The Cisco Unified IP Conference Phone 8831 offers many improvements. New features include:
● Superior wideband acoustics with the first two-element speaker in a conference phone; this feature allows
the phone to capture the full voice spectrum without having to compromise with a single-element speaker
● Expanded room coverage with support for daisy chaining two units
● Support for optional DECT wireless extension microphone: sold separately
● Session Initiation Protocol (SIP) signaling
● Device authentication and signaling encryption using Transport Layer Security (TLS) with Advanced
Encryption Standard 128 (AES-128)
● Media encryption using Secure Real-Time Transport Protocol (SRTP) with AES-128Feature Specification
Features
Superior wideband acoustics ● 160 Hz to 20 kHz, +/-3 dB.
● The latest in wideband codecs for maximum voice bandwidth.
● Enhanced speech quality and speaker recognition.
Output 92-dB SPL peak output*
Expanded room coverage ● 160-degrees conical pattern provides even coverage of listening area.
● Four Hemi-Cardioid microphones are perfectly spaced so that they combine to provide a 180-degree pickup pattern around the device. Speech is captured at the same level at all points around the Cisco Unified IP
Conference Phone 8831.
● Ability to grow to fit a variety of room needs
◦ Small Office (base unit)
◦ Standard Conference Room (base unit and 2 wired or wireless extension microphones)
◦ Boardroom (daisy chaining two base units)
◦ Large Boardroom (daisy chaining two base units and 2 wired or wireless extension microphones)
Microphone Accessory Options
Wired microphone These microphones extend the operational range of the Cisco Unified IP Conference Phone 8831 with even
coverage around the periphery of the device with 7 feet of additional reach.
Wireless microphone DECT wireless microphones for the Cisco Unified IP Conference Phone 8831 provide additional coverage with
the added flexibility of 300 feet of range.
Wired control panel The panel allows easy control of the unit and viewing of the display without having to move the entire unit.
Power Features
IEEE 802.3af line power Local power supply is not required.
Cisco Power Cube 3 This power cube uses a standard Cisco Unified IP Phone Power Supply for non-Power over Ethernet (PoE)$ 800.46 -
AIR-ANT2547V-N Cisco 2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Antenna, N Connector
Cisco AIR-ANT2547V-N
2.4 GHz 4dBi/5 GHz 7dBi Dual Band Omni Antenna, N Connector
DESCRIPTION
Product Type : Antenna
Antenna Placing / Mounting: Outdoor
Frequency Range:2.4 GHz, 5 GHz
Gain:7 dBi (for 5 GHz), 4 dBi (for 2.4 GHz)
Directivity: Omni-directional
$ 276.89 -
AIR-AP1832I-E-K9C Cisco Aironet Mobility Express 1830 Series
Cisco AIR-AP1832I-E-K9C
Aironet Mobility Express 1830 Series
DESCRIPTION
Ideal for small and medium-sized networks, the Cisco® Aironet® 1830 Series delivers industry-leading wireless performance with support for the latest Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing requirements of wireless networks by delivering a better user experience. The 1830 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support.
Cisco Unified Wireless Network Software Release with AireOS wireless controllers: ● 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points
$ 449.24 -
AIR-AP3802I-E-K9 Cisco 802.11ac W2 AP w/CA; 4×43; Mod; Int Ant;mGig E Domain
Cisco AIR-AP3802I-E-K9
802.11ac W2 AP w/CA; 4×43; Mod; Int Ant;mGig E Domain
DESCRIPTION
Antennas :Internal Antennas
Interfaces :
2 Ethernet ports
100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
CAT 5e cabling
Higher-quality 10GBASE-T (CAT 6/6a) cabling
100/1000BASE-T autosensing (RJ-45 – AUX port)
Management console port (RJ-45)
System : 1024 MB DRAM
256 MB flash
$ 1,074.08 -
AIR-CAP3702E-E-K9 Cisco 802.11ac Ctrlr AP 4×4:3SS w/CleanAir; Ext Ant; B Reg Domain
Cisco AIR-CAP3702E-E-K9
802.11ac Ctrlr AP 4×4:3SS w/CleanAir; Ext Ant; B Reg Domain
DESCRIPTION
WiFi Standards: 802.11a/b/g/n/ac
Ideal For: Midsize or large enterprises that require mission-critical traffic
Max Data Rate 5GHz : 1.3 Gbps
MIMO Radio Design: Spatial Streams :4 x 4:3
Client count/Client Link client count :200/128
$ 980.15 -
AIR-SAP2602I-E-K9 Cisco Standalone Wireless Access Point
Cisco AIR-SAP2602I-E-K9 Standalone Wireless Access Point
Product Code
AIR-SAP2602I-E-K9
RAM
256 MB
Wireless Type
802.11G, 802.11n
Brand Name
Cisco
Item model number
AIR-SAP2602I-E-K9
Item Weight
2.5 pounds
Product Dimensions
8.7 x 8.7 x 2.1 inches
Item Dimensions L x W x H
8.7 x 8.7 x 2.13 inches
Flash Memory Size
32
$ 418.74 -
AIR-XLTC50DA31 Cisco Bridge
Cisco AIR-XLTC50DA31 Bridge
Brand Cisco Type of device Bridge Data link layer IEEE 802.1q Total data transfer rate (theoretical) 160 Mbit/s Frequency band 5GHz $ 2,820.66AIR-XLTC50DA31 Cisco Bridge
$ 2,820.66