RITTAL SR 2340.700

Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures

Product description
Description: To mount 482.6 mm (19″) equipment.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
or TS punched sections with mounting flange, 17 x 73 mm are required
Supply includes: Cam with double-bit lock insert
Parts for attaching to the installation kit

RITTAL SZ 4140.010

Cabinet Compact Light

Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yes

RITTAL TS 8601.085

Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly components

Dimensions: Height: 100 mm (3.9 ˝)

Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)

RITTAL TS 8611.070 Comfort Handle

Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).

RITTAL TS 8612.080

Cabinet Chassis 17 x 73 mm

Product description
Version: For the inner mounting level and for mounting on doors
Description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply
position in the TS holes and secure.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: The rail for interior installation is required when installing in CM, TP
Supply includes: Assembly screws
Product features
Suitable for: Width/depth: 800 mm
Dimensions: Length: 790 mm (31 ˝)
Installation options: On the vertical TS enclosure profile: on the outer mounting level, all-round, height-offset
For SE, may additionally be mounted on the top horizontal section in the depth
In the tubular door frame for TS, SE and PC
In CM and TP via rails for interior installation: in width, for inner mounting level
Simply locate installation kit into component shelves and secure. One pack is sufficient for 2
component shelves. 100 kg surface load, static
Suitable for door
width:900 mm

Packaging unit: 4 pc(s).
Weight/packaging
unit:
3.58 kg (7.9 lb.)

Product description
(long):
TS TS punched section with mounting flange, 17 x 73 mm, for inner mounting level: for W/D:
800 mm, for door width: 900 mm, L: 790 mm

RITTAL TS- 8601.600

Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly parts

Dimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kg