-
MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
EXFO MAX-720C-Q1- QUAD-XX
DESCRIPTION
MAX-720C, QUAD OTDR Module
Port 1: 850/1300 nm, 27/29 dB (50/125 & 62.5/125 μm)Port 2: 1310/1550 nm 36/35 dB (9/125 μm)
$ 12,366.25MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
$ 12,366.25 -
OPTRONICS OFC-LT-41-12
OPTRONICS OFC-LT-41-12 ( 1000 METER )
OM4-12 CORE-LOOSE TUBE-E GLASS-BLACK-ULSZH-OM4
$ 3,354.30OPTRONICS OFC-LT-41-12
$ 3,354.30 -
OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
OPTRONICS OFC-LSTW-31-06
Single Loose Tube Steel Tape Armoured Cable With Steel Wires.
Single Loose Tube Metallic Arwoured Cable With Steel Wire Stength Members.
The Gel Filled Single Loose Tube Consists of 2 to 12 250ur Singlemode (G.652.D)
or Multimode (OM1/OM2/OM3/OM4) Fibers And it is Protected by a Water Swellable Tape.
There Is an Option for Low Smoke Zero Halogen (LSZH) or Polyethelene (PE) Jacket.
$ 2,450.38OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
$ 2,450.38 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.91 -
1323-428813BK NORDEN Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
NORDEN 1323-428813BK
Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
FEATURES
Intelligent design ensures easy installation
Cable entry through bottom and top panel
180 degree turning angle for front door
Toughened glass door
Removable side panel provides easy maintenance
19” installation
Plinth (optional)Material SPCC cold rolled steel
Deg. of Protection IP20
Surface finish
Material thickness Mounting profile: 2.0 mm, Angel: 1.5 mm, Other: 1.2 mm
Loading capacity 800 KGS
Degreasing, phosphoric, powder coated$ 816.79$ 871.25 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.23 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.23 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.88PUNDUIT NUL6X04WH-HEG
$ 233.88 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.22PUNDUIT NUC6C04BU-CE
$ 140.22 -
OPTRONICS OCC-6-12-305
OPTRONICS OCC-6-12-305
Cat 6 U/UTP 23 AWG PVC Cable Grey 305m Box
$ 114.35OPTRONICS OCC-6-12-305
$ 114.35 -
121-21P18048L NORDEN Category 5e UTP Patch Panel 48 Port Loaded
NORDEN 121-21P18048L
Category 5e UTP Patch Panel 48 Port Loaded
DESIGN & MATERIALS
Panel Type Flat
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm & 2U: 88.4 mm
Outlet Style Unkeyed RJ-45
Outlets 24 – 48 Modular Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 97.40 -
421-1SC024BK NORDEN SC Simplex 24 Port EFA Fibre Optic Compact Patch Panel Rack Mount
NORDEN 421-1SC024BK
FIBRE OPTIC EASY FRONT ACCESS COMPACT PATCH PANEL
FEATURES
Easy front access .
Front Panel equiped with adaptors.
Sliding patch panel for easy rework and maintenance.
Cable clamps on the inner surface for fixing cables.
19 ̋ rack mount 1U Size.
Fixed Splice tray for splice utilisation designed with plexi glass top – cover & PC material .
Patch panels for SC,LC,ST,FC,MTRJ & E2000.
The enclosure is made of cold rolled steel sheet, with electrostatic – spraying.DESIGN & MATERIALS
Mounting Type Rack
Colour Black or Beige or white
Material Cold rolled carbon sheet steel with electrostatic spraying
FIBRE OPTIC EASY FRONT ACCESS
COMPACT PATCH PANEL
Norden EFA Fiber Optic Compact Patch panel is designed for fiber
termination and distribution.This smart design and professional
engineering provides easy installation and maintenance
Rack Type Sliding
‘U’ Size 1U=12/24port
Cable Port Max. 2-4
Environment Temperature- Relative -40 ºC to +80 ºC
Humidity ≤85 % (30 degree)
Atmosphere Pressure 70-106 KPa
Intensity ≤15kv(DC) /1min.no spark-over and no flying arc
Fibre Bending Radius ≥ 40 mm
Material Thickness 2mm
Insulated Resistance ≥2*10M Ohm/500V (DC)
Adaptor Port Simplex$ 83.86
