-
FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.59 -
FFWLCLC42-JXF010 COMMSCOPE Singlemode LC-LC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFWLCLC42-JXF010
Singlemode LC-LC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Color, boot A Blue
Color, boot B Blue
Construction Type Duplex patch cord
Jacket Color Yellow
Total Fibers, quantity 2$ 27.23 -
FFWSCSC42-JXF010 COMMSCOPE Singlemode SC-SC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFWSCSC42-JXF010
Singlemode SC-SC 1.6MM Duplex Fiber Patchcord
DESCRIPTIO
Construction Type Duplex patch cord
Interface, Connector A SC/UPC
Interface, Connector B SC/UPC
Jacket Color Yellow
Polarity Method B
Total Fibers, quantity 2$ 27.23 -
FFXLCLC42-MXF010 COMMSCOPE Multimode LC-LC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXLCLC42-MXF010
Multimode LC-LC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B LC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2$ 28.86 -
FFXLCLC42-MXF010 COMMSCOPE MULTIMODE LC-LC 1.6MM DUPLEX
COMMSCOPE FFXLCLC42-MXF010
MULTIMODE LC-LC 1.6MM DUPLEX
DESCRIPTION
Jacket Color Aqua
Total Fibers, quantity 2Cord Length, maximum 999 ft | 999 m
Cord Length, minimum 1 ft | 1 m
Ordering Note For lengths greater than 999 ft (304 m), orders must be in meters | Minimum length
may vary based on cable configurationConstruction Type Duplex patch cord
Interface, connector A LC
Interface Feature, connector A Standard
Interface, connector B LC$ 26.95 -
FFXLCSC42 COMMSCOPE OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex
COMMSCOPE
OM4 LC to SC, Fiber Patch Cord, 1.6 mm Duplex, Low Smoke Zero Halogen (LSZH)
General Specifications
Color, boot A Aqua
Color, boot B Aqua
Color, connector A Beige
Color, connector B Beige
Construction Type Duplex patch cord
Interface, Connector A LC/UPC
Interface, Connector B SC/UPC
Jacket Color Aqua
Polarity Method B
Total Fibers, quantity 2
Dimensions
Cable Assembly Length, minimum (ft) 2
Cable Assembly Length, maximum (ft) 325
Cable Assembly Length, minimum (m) 1
Cable Assembly Length, maximum (m) 99
Diameter Over Jacket 1.6 mm | 0.063 in$ 29.13 -
FFXSCSC42-MXF010 COMMSCOPE Multimode SC-SC 1.6MM Duplex Fiber Patchcord
COMMSCOPE FFXSCSC42-MXF010
Multimode SC-SC 1.6MM Duplex Fiber Patchcord
DESCRIPTION
Construction Type Duplex patch cord
Interface, connector A SC
Interface Feature, connector A Standard
Interface, connector B SC
Interface Feature, connector B Standard$ 28.86 -
FPSLSCSX0241B Opterna 19″ Unloaded 1U Sliding Patchpanel 24 SC Simplex (LC Duplex) Port- Black
FPSLSCSX0241B Opterna
DESCRIPTION
The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U and 4U height increments.
The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The panel supports 24 way, 48 way and 96 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cut-outs on the back for use with pre-terminated MTP/MPO trunks.
$ 57.18 -
FWE-MOD-12-M-C AFL Modular DIN Rail Mounted Enclosure
AFL FWE-MOD-12-M-C
Modular DIN Rail Mounted Enclosure
DESCRIPTION
AFL specialises in the development of fibre optic enclosures to suit all environments and customer needs. We have developed a complete range to suit almost any application including 19” rack mounting, wall mounting, Defence style, IP-rated for outside
plant environments, industrial uses and for underground terminations.
Our extensive range of enclosures can accommodate a variety of installation applications including fusion splicing, directtermination, pre-terminated cables, MTP connectivity and pre-terminated copper cabling.
In addition, AFL can offer a customer tailored enclosure or cabinet solution to suit non-standard applications.$ 508.86 -
PCOSP-6AU-BK-295FT | CO15582-01F295 COMMSCOPE Cat 6A, UTP, Outdoor Patch Cord
COMMSCOPE PCOSP-6AU-BK-295FT | CO15582-01F295
Cat 6A, UTP, Outdoor Patch Cord
DESCRIPTION
ANSI/TIA Category 6A
Cable Type U/UTP (unshielded)
Conductor Type Solid
Jacket Color Black
Pairs, quantity 4$ 188.13 -
SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.36 -
SCSAFPUK2WH Opterna Angular Faceplate 86 x 86 mm for 2 Keystone Jack, U.K Standard
SCSAFPUK2WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
STANDARDS
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.63
