-
PUNDUIT NKFP24Y
PUNDUIT NKFP24Y
NK Modular Patch Panel, Flat, 24 Port, 1 RU
$ 15.52PUNDUIT NKFP24Y
$ 15.52 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.91 -
SR 2340.700 RITTAL Pivoting Frame, Large, Without Trim Panel for TS, SE, 600 mm and 1200 mm Wide Enclosures
RITTAL SR 2340.700
Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures
Product description
Description: To mount 482.6 mm (19″) equipment.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
or TS punched sections with mounting flange, 17 x 73 mm are required
Supply includes: Cam with double-bit lock insert
Parts for attaching to the installation kit$ 359.32 -
SZ 4140.010 RITTAL Cabinet Compact Light
RITTAL SZ 4140.010
Cabinet Compact Light
Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yes$ 173.00 -
SZ 4315.710 RITTAL Cabinet SZ Door-Operated Switch, with Connection Wire for Compact Light, L: 600 mm, Yellow
RITTAL SZ 4315.710
Product description
Version: With connection cable
Product features
Dimensions: Length: 600 mm (24 “)
Rated operating
voltage:400 V
Installation options: for compact lights
For rated current
(max.):240 V AC, 2,5 A
Equipment
(electrical):
Cable color: Yellow
Rated insulation
voltage:400 V AC
Rated impulse
withstand voltage,
phase to phase:6000 V AC
Packaging unit: 1 pc(s).
Weight/packaging
unit:0.12 kg (0.3 lb.)
Copper weight (kg
per piece):0$ 39.67 -
TE 7888.892 RITTAL Cabinet 42U Width: 800 mm Height: 2000 mm Depth: 1000 mm
RITTAL TE 7888.892
Product description
Benefits: No frame structure
Optimum accessibility
Readily dismantled and therefore easily installed
Material: Sheet steel
Surface finish: Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour: RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Self-supporting 482.6 mm (19″) mounting frames, front and rear, depth-variable
Sheet steel door vented (vented surface area > 67%), front with designer handle, 130° hinge,
security lock 3524 E
Sheet steel door vented (vented surface area > 67%), rear with 130° hinge, security lock 3524E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including concealed cut-out for cable entry and optional fan
4 levelling feet, M10 (supplied loose)
4 spacers, 20 mm (supplied loose) to raise the roof plate 4 Baying kit
Basic material: Sheet steel
Product features
Dimensions: Width: 800 mm
Height: 2000mm Depth: 1000 mmInstallation height for components:42 U
Distance between
levels as delivered:745 mm
Load capacity: 7000 N
Packs of: 1 pc(s).
Weight/pack: 81 kg$ 1,089.34 -
TS 8601.085 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth Components, Front and Rear
RITTAL TS 8601.085
Product description
Description: To mount between the base/plinth components. For height 200 mm, two 100 mm base/plinth
trim panels can be used.
Material: Carbon steel
Surface finish: Spray-finished
Color: RAL 7035
Mounting tip: 100 mm side trim panels can be installed rotated through 90° to provide stabilization for bayed
base/plinth components. Base/plinth baying brackets are required here
Supply includes: 2 plinth/base trim panels
Assembly componentsDimensions: Height: 100 mm (3.9 ˝)
Packaging unit: 2 pc(s).
Weight/packaging
unit:2.81 kg (6.2 lb.)$ 36.60 -
TS 8611.070 RITTAL Comfort Handle
RITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).$ 43.77 -
TS 8611.080 RITTAL Handle Adapter For Comfort Handle
RITTAL TS 8611.080
Handle Adapter For Comfort Handle
Product features
Packaging unit: 1 pc(s).
Weight/packaging
unit:
0.08 kg (0.2 lb.)
EAN: 4028177211933Product description
(long):
TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035$ 15.79 -
TS 8611.180 RITTAL Lock Insert For Handle Systems
RITTAL TS 8611.180
Lock Insert For Handle Systems
Product description
Supply includes: with 2 keys
Product features
Installation in handle
system:
Comfort handle for lock inserts
Mini-comfort handle for lock inserts
Lock Insert: Security lock insert no. 3524 E
Packaging unit: 1 pc(s).
Weight/packaging unit: 0.04 kg (0.1 lb.)
Product description (long):
TS Lock insert for handle systems, lock-insert locking Nr. 3524 E$ 16.34 -
TS 8612.080 RITTAL Cabinet Chassis 17 x 73 mm
RITTAL TS 8612.080
Cabinet Chassis 17 x 73 mm
Product description
Version: For the inner mounting level and for mounting on doors
Description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply
position in the TS holes and secure.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: The rail for interior installation is required when installing in CM, TP
Supply includes: Assembly screws
Product features
Suitable for: Width/depth: 800 mm
Dimensions: Length: 790 mm (31 ˝)
Installation options: On the vertical TS enclosure profile: on the outer mounting level, all-round, height-offset
For SE, may additionally be mounted on the top horizontal section in the depth
In the tubular door frame for TS, SE and PC
In CM and TP via rails for interior installation: in width, for inner mounting level
Simply locate installation kit into component shelves and secure. One pack is sufficient for 2
component shelves. 100 kg surface load, static
Suitable for door
width:900 mmPackaging unit: 4 pc(s).
Weight/packaging
unit:
3.58 kg (7.9 lb.)Product description
(long):
TS TS punched section with mounting flange, 17 x 73 mm, for inner mounting level: for W/D:
800 mm, for door width: 900 mm, L: 790 mm$ 73.94 -
TS- 8601.600 RITTAL Base/Plinth Components, Front and Rear, 100 mm Sheet Steel
RITTAL TS- 8601.600
Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly partsDimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kg$ 41.13