-
OPTRONICS OFC-LT-41-12
OPTRONICS OFC-LT-41-12 ( 1000 METER )
OM4-12 CORE-LOOSE TUBE-E GLASS-BLACK-ULSZH-OM4
$ 3,354.39OPTRONICS OFC-LT-41-12
$ 3,354.39 -
OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
OPTRONICS OFC-LSTW-31-06
Single Loose Tube Steel Tape Armoured Cable With Steel Wires.
Single Loose Tube Metallic Arwoured Cable With Steel Wire Stength Members.
The Gel Filled Single Loose Tube Consists of 2 to 12 250ur Singlemode (G.652.D)
or Multimode (OM1/OM2/OM3/OM4) Fibers And it is Protected by a Water Swellable Tape.
There Is an Option for Low Smoke Zero Halogen (LSZH) or Polyethelene (PE) Jacket.
$ 2,450.45OPTRONICS OFC-LSTW-31-06 (1000 meter Reel)
$ 2,450.45 -
CL5708M-ATA-AE ATEN 17″ 8P PS/2-USB VGA LCD KVM SW. W/USA
ATEN CL5708M-ATA-AE
17″ 8P PS/2-USB VGA LCD KVM SW. W/USA
DESCRIPTION
• Exclusive LED illumination light – designed by ATEN to illuminate the keyboard and touchpad to allow visibility in lowlight conditions
• LCD module USB port allows each computer to access USB peripherals
• LCD module rotates up to 115 degrees for a more comfortable viewing angle• Auto PS/2 and USB interface detection
$ 2,039.32 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.96 -
-
ATEN CS1792-AT-E
ATEN CS1792-AT-E
ATEN :-2Port USB HDMI KVMP Switch
$ 255.94ATEN CS1792-AT-E
$ 255.94 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.24 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.24 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.88PUNDUIT NUL6X04WH-HEG
$ 233.88 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.22PUNDUIT NUC6C04BU-CE
$ 140.22 -
OPTRONICS OCC-6-12-305
OPTRONICS OCC-6-12-305
Cat 6 U/UTP 23 AWG PVC Cable Grey 305m Box
$ 114.35OPTRONICS OCC-6-12-305
$ 114.35 -
D60.10865.PSOXX HES Patch Panel Data/Voice 1U 50port
HES D60.10865. PSOXX Patch Panel Data/Voice 1U 50port
Product Overview
50 way voice patch panels are in 1U high density format for greater voice integration than traditional patch panels. Designed to be utilised with any voice combination, of up to three pairs.
Features & Benefits
• Constructed from mild steel with a black finish
• Cat3 compatible
• 6 vertical IDC connectors per RJ45
• 110/LSA compatible IDC connectors
• Perforated cable strain relief for multi-pair cables
• 5 x 10 way circuit boards for modularity
• 19 rack mountable including fixing kit
• UK Manufactured
50 way voice patch panel | V001$ 99.38