-
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.91 -
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.76 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.23 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.23 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.88PUNDUIT NUL6X04WH-HEG
$ 233.88 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.22PUNDUIT NUC6C04BU-CE
$ 140.22 -
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.70 -
N42i.101 Nexans DIN-Rail Outlets and Boxes
NEXANS
· For DIN-Rail mount (35mm)
· Data connection for the industry
· For up to 6 copper of fibre optic Snap-In connectors (not included)
· Splice trays as accessories
· For technical enclosures, Wireless Access Points, Industrial cabinets
· Snap-In connectors not included· Robust metal body, powder coated
· IP20 protection rating with individual dust shutters
Possibility of Individual port colour coding through coloured shutter
· up to 6 LANmark RJ45 or GG45 Snap-In jacks
· up to 6 SC Snap-In couplers (6 fibres)
· up to 3 SC duplex Snap-In couplers (6 fibres)
· up to 6 LC duplex Snap-In couplers (12 fibres)
·
· Mix of copper jacks and optic adapters possible
· Strain release through cable gland or tie wraps
· Removable (screws) side cover
Type of cables
· Shielded Industrial Category 6 and 7 data cables, AWG 24 to AWG23
· Fiber optic cables up to 15mm diameter
· Simplex – Duplex and breakout fibre optic cables
· Tight buffer or loose tube fibre optic cables
· Pre-terminated cables$ 127.69 -
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M UTP Cable Cat 6 3M-305 Mtr Box Belonging to the 3M Volition Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards. Length markings on the cable sheath. Low smoke, zero halogen (LSOH) and PVC versions available Benefits.Good headroom over Category 6 performance. Installer friendly. Solutions for all levels of fire protection.
$ 114.35 -
N439.4SNB Nexans LANmark-OF Sliding Patch Panels
N439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.$ 78.96$ 83.04N439.4SNB Nexans LANmark-OF Sliding Patch Panels
$ 78.96$ 83.04 -
VOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacks$ 47.65 -
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04
